I don't know what's going on exactly, but I've been getting flash drive corruption when booting with UEFI on my HP EliteDesk 800 G1.
I boot with the Knoppix 8.2 DVD, install to flash drive with fat32 and a persistent image file and reboot.
In the bios startup boot menu (F9 on the HP) I get two selections for my flash drive boot, the same drive listed in two locations: one in UEFI and the other in Legacy mode.
I thought, oh it will boot into UEFI mode, let's try it!
It seems like every time I've tried a UEFI boot it will clobber my flash drive, overwriting the first sectors of the flash drive and in general corrupting it.
I start seeing a bunch of inode errors in my dmesg log.
It's done this a couple of times now, so I'm going to see if just booting with Legacy mode will be safe.
It could be the HP system, the flash drive, or maybe booting with UEFI mode.
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$40.12
Juniper Networks EX2300-C 12-Port 2XSFP Uplinks PoE+ Switch P/N: EX2300-C-12P
$299.99
JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER
$210.00
Juniper Networks EX4300-48T 48 Port Gigabit 4 QSFP 40G 2xPSU AFO Network Switch
$89.00
Juniper Networks EX3300-24P | 24 Port Gigabit Network Switch w/ Power cord
$53.99
Juniper EX3400-48P 48-Ports PoE+ 4x SFP+ and 2x QSFP+ Managed Switch Tested
$205.00
Juniper EX4600-40F-AFI 24 SFP+/SFP Ports 4 QSFP+ Ports Dual AC Switch
$999.00
JUNIPER EX3300-48T 48 PORT SWITCH TESTED & RESET w/ Rack Ears
$49.99
New Factory Sealed Juniper EX2300-48P Networks 48-Port Managed Ethernet Sealed
$499.00
Juniper Networks EX3300-48T 48-Port PoE+ Gigabit Ethernet Switch 4x SFP+ TESTED
$99.99