I don't know what's going on exactly, but I've been getting flash drive corruption when booting with UEFI on my HP EliteDesk 800 G1.
I boot with the Knoppix 8.2 DVD, install to flash drive with fat32 and a persistent image file and reboot.
In the bios startup boot menu (F9 on the HP) I get two selections for my flash drive boot, the same drive listed in two locations: one in UEFI and the other in Legacy mode.
I thought, oh it will boot into UEFI mode, let's try it!
It seems like every time I've tried a UEFI boot it will clobber my flash drive, overwriting the first sectors of the flash drive and in general corrupting it.
I start seeing a bunch of inode errors in my dmesg log.
It's done this a couple of times now, so I'm going to see if just booting with Legacy mode will be safe.
It could be the HP system, the flash drive, or maybe booting with UEFI mode.
Cisco SFP-10/25G-CSR-S 10/25GBASE-CSR SFP28, 850nm, 100m, LC,
$54.00
Cisco GLC-TE 1000BASE-T SFP, 100m, Copper, RJ45
$27.99
Cisco GLC-GE-100FX 100BASE-FX SGMII SFP, 1310nm, 2km, LC, MMF
$83.99
Cisco SG110 24 Port Gigabit Ethernet Switch w/ 2 x SFP SG110-24
$117.00
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
SFP-10G-SR Original Cisco 10GBASE-SR SFP+ V02 Multi mode Transceiver 10-2415-02
$5.00
Lot of 10 - HP 10Gb SR SFP+ Transceiver 455883-B21 455885-001 456096-001 850nm
$23.99
Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$13.89
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$89.00
Juniper Networks EX3300-48P 48-Port PoE+ 4x SFP+ Network Switch w/ Power Cord
$43.95