-
no3d cheat parameter gets in an endless loop of starting X with Knoppix 8.2
I usually use knoppix with the no3d boot parameter, like "knoppix64 no3d noscreensaver" but I've noticed with 8.2 it will go into a endless cycle of trying to start X, failing and trying again.
If I don't use no3d, everything is fine.
I thought no3d would just disable compiz.
-
Same observation here on laptop with Intel Haswell and desktop with nvidia GT218.
Funny observation: on VirtualBox virtual machine with 16 MB video memory and no 3D acceleration, booting with cmdline "knoppix64 keyboard=dk" works fine, starting X without compiz. It seems that if Knoppix 8.2 is allowed to detect that the machine has too little graphics resources to run compiz, it starts X with window manager openbox-lxde just fine. However, when I boot the same VM with cmdline "knoppix64 keyboard=dk no3d" it fails to start X and enters the endless cycle of failing.
-
Junior Member
registered user
no3d changes "something" more ...
fortunately 8.3 has ( undocumented ? ) nocompiz bootparameter
it gets parsed by /etc/X11/Xsession.d/45knoppix
however the "no3d" bug making x unstartable should be investigated ...
the error message with no3d is:
[ 40.424] vesa: Ignoring device with a bound kernel driver
Code:
[ 40.404] (II) LoadModule: "vesa"
[ 40.404] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 40.404] (II) Module vesa: vendor="X.Org Foundation"
[ 40.404] compiled for 1.19.0, module version = 2.3.4
[ 40.404] Module class: X.Org Video Driver
[ 40.404] ABI class: X.Org Video Driver, version 23.0
[ 40.404] (II) VESA: driver for VESA chipsets: vesa
[ 40.424] vesa: Ignoring device with a bound kernel driver
[ 40.424] (WW) Falling back to old probe method for vesa
[ 40.424] (EE) Screen 0 deleted because of no matching config section.
[ 40.424] (II) UnloadModule: "vesa"
[ 40.424] (EE) Device(s) detected, but none match those in the config file.
the difference in xorg.conf is as follows:
Code:
knoppix@Microknoppix:~$ diff xorg.conf-mit-nocompiz xorg.conf-mit-no3d
66c66
< Option "Composite" "Enable"
---
> Option "Composite" "Disable"
99c99,100
< # Driver (chipset) autodetect
---
> # Specified driver (chipset)
> Driver "vesa"
who knows why the kernel already allocated the device so vesa cancels itself ?
why at all nod3 writes vesa in the config ?
the followin scripts are also part of configuring x11 :
/sbin/hwsetup
/sbin/mkxorgconfig
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig UPOE Network Switch, no module picture](/store/img/g/E0cAAOSwNzxmPkm2/s-l225/Cisco-Catalyst-C9300-24UX-A-24-Port-10G-mGig-UPOE-.jpg)
Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig UPOE Network Switch, no module
$279.97
![Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig Copper UPOE Network Switch picture](/store/img/g/UdkAAOSwDmpmMtqf/s-l225/Cisco-Catalyst-C9300-24UX-A-24-Port-10G-mGig-Coppe.jpg)
Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig Copper UPOE Network Switch
$475.00
![Cisco ASR1000-RP2 ASR1000 Route Processor picture](/store/img/g/09sAAOSwVRZmfG2J/s-l225/Cisco-ASR1000-RP2-ASR1000-Route-Processor.jpg)
Cisco ASR1000-RP2 ASR1000 Route Processor
$130.00
![Cisco 3560CG Series 8 Port POE Network Switch WS-C3560CG-8PC-S picture](/store/img/g/fjkAAOSweShmcw9Z/s-l225/Cisco-3560CG-Series-8-Port-POE-Network-Switch-WS-C.jpg)
Cisco 3560CG Series 8 Port POE Network Switch WS-C3560CG-8PC-S
$80.00
![🔥🔥🔥 CISCO SFP-10G-SR V03 10-2415-03 850nm 10GBASE-SR SFP+ Multi Module 🔥🔥🔥 picture](/store/img/g/KTkAAOSwcmBisISE/s-l225/-CISCO-SFP-10G-SR-V03-10-2415-03-850nm-10GBASE-SR-.jpg)
🔥🔥🔥 CISCO SFP-10G-SR V03 10-2415-03 850nm 10GBASE-SR SFP+ Multi Module 🔥🔥🔥
$6.80
![GENUINE Cisco SFP-10G-SR V03 SFP+ GBIC Transceiver Module 10-2415-03 picture](/store/img/g/tAkAAOSwdENkHItI/s-l225/GENUINE-Cisco-SFP-10G-SR-V03-SFP-GBIC-Transceiver-.jpg)
GENUINE Cisco SFP-10G-SR V03 SFP+ GBIC Transceiver Module 10-2415-03
$6.80
![Cisco C9300NM8X Network Switch Module 8 X 10GE picture](/store/img/g/RfsAAOSw8blmdfHL/s-l225/Cisco-C9300NM8X-Network-Switch-Module-8-X-10GE.jpg)
Cisco C9300NM8X Network Switch Module 8 X 10GE
$297.00
![Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850 picture](/store/img/g/yEAAAOSwxVReIhma/s-l225/Cisco-C3850-NM-2-10G-2-Port-Network-Exp-Module-for.jpg)
Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850
$30.99
![Cisco WS-C2960X-48FPD-L 48 V07 POE+ GE+2 10G SFP+, LAN BASE 740W w/ C2960X-Stack picture](/store/img/g/cqoAAOSwtYVmS7LQ/s-l225/Cisco-WS-C2960X-48FPD-L-48-V07-POE-GE-2-10G-SFP-LA.jpg)
Cisco WS-C2960X-48FPD-L 48 V07 POE+ GE+2 10G SFP+, LAN BASE 740W w/ C2960X-Stack
$110.00
![Cisco 2900 Series CISCO2901/K9 v06 Integrated Services Router picture](/store/img/g/b9wAAOSw8kFmccbz/s-l225/Cisco-2900-Series-CISCO2901-K9-v06-Integrated-Serv.jpg)
Cisco 2900 Series CISCO2901/K9 v06 Integrated Services Router
$39.99