I've noticed that if I use a persistent image file and for some reason it gets corrupted (powering off abnormally) that I'll get a bunch of filesystem errors in dmesg. I can fix it by booting with the "noimage" cheat code, like "knoppix64 2 noimage" and then run "fsck.ext2 /mnt-system/KNOPPIX/knoppix-data.img" and then "sudo reboot".
It'd be really nice if there were an automatic check of the ext2 image when knoppix boots. It would also let you know if errors have crept into your filesystem since knoppix still works but you see weird messages like "unable to write /etc/fstab".
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
HPE 727263-003 BL460c G9 Raid BBWC Smartstorage Battery
$24.99
Dell R630 8SFF 2.1Ghz 16-Core 128GB H730 RAID 10GB RJ-45 NIC 2x750W PSU 8x Trays
$425.04
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
Cisco UCS-Raid9271CV-8I Cisco LSI MegaRaid SAS Controller
$19.01
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$87.99
4 Bay RAID External Hard Drive Enclosure for 2.5/3.5" SATA HDD/SSD
$79.99
G TECHNOLOGY G RAID 0G04228 2-Bay Thunderbolt 2 RAID Array W/Power Supply
$99.99