I've noticed that if I use a persistent image file and for some reason it gets corrupted (powering off abnormally) that I'll get a bunch of filesystem errors in dmesg. I can fix it by booting with the "noimage" cheat code, like "knoppix64 2 noimage" and then run "fsck.ext2 /mnt-system/KNOPPIX/knoppix-data.img" and then "sudo reboot".
It'd be really nice if there were an automatic check of the ext2 image when knoppix boots. It would also let you know if errors have crept into your filesystem since knoppix still works but you see weird messages like "unable to write /etc/fstab".
CISCO 5108 Blade Server Chassis N20-C6508
$200.00
DELL POWEREDGE M620 SERVER BLADE INTEL XEON E5-2670 @ 2.60GHZ 128GB RAM 2X 146GB
$399.00
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell M630 PowerEdge Blade Server
$700.00
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG
$69.99
Dell PowerEdge M620 Blade Server
$39.99
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99