Results 1 to 10 of 10

Thread: Knoppix 8.3

  1. #1
    Moderator Moderator
    Join Date
    Mar 2004
    Location
    Menlo Park, California
    Posts
    674

    Knoppix 8.3

    Hello,
    Knoppix 8.3 is out ! cf: http://www.knopper.net/knoppix/index-en.html
    Can someone help me get an iso copy of the DVD ? (it is not available outside of Germany)
    I am willing to pay for it via Paypal.
    Thanks,
    Gilles

  2. #2
    Senior Member registered user
    Join Date
    Sep 2006
    Posts
    802
    It looks like we can order the magazine with the DVD - at least I have now paid for it for sending to Norway, remains to be seen if it will eventually turn up. (The Docker adaptation is the main reason I will take a look at it.)

  3. #3
    Senior Member registered user
    Join Date
    Sep 2006
    Posts
    802
    I got the magazine by mail, DVD works fine, have the 8.3 ISO image on disk. (And two "remasterings" so far, now there are five cloop files.)
    Caveat: Mounts mnt-system ro when run under kvm, even when started from volume disjoint from host's /mnt-system.

  4. #4
    Do you know if it works without 3d (no3d) when you boot it. Knoppix 8.2 doesn´t. Thanks!

  5. #5
    Senior Member registered user
    Join Date
    Sep 2006
    Posts
    802

    Knoppix 8.2/8.3 may need updating of graphics modules

    Quote Originally Posted by joselb View Post
    Do you know if it works without 3d (no3d) when you boot it. Knoppix 8.2 doesn´t. Thanks!
    I have seen a bit of the same problem, but in both versions, I get the impression that it goes away after updating graphics modules. I could at first not get it to initialize graphics correctly with no3d, but after a lot of updating, everything went fine. To check, I just started a poor man's install of 8.3 with no3d, no problems at all. The last two KNOPPIXes definitely benefit from updating.

  6. #6
    Thanks. I don t know how to update if I only boot with my usb pendrive as it is, but good to know that this problem continues... I will continue with 8.1
    Quote Originally Posted by Capricorny View Post
    I have seen a bit of the same problem, but in both versions, I get the impression that it goes away after updating graphics modules. I could at first not get it to initialize graphics correctly with no3d, but after a lot of updating, everything went fine. To check, I just started a poor man's install of 8.3 with no3d, no problems at all. The last two KNOPPIXes definitely benefit from updating.

  7. #7
    Senior Member registered user
    Join Date
    Sep 2006
    Posts
    802

    Easy to upgrade packages with persistent store and Synaptic package manager

    Quote Originally Posted by joselb View Post
    Thanks. I don t know how to update if I only boot with my usb pendrive as it is, but good to know that this problem continues... I will continue with 8.1
    If you have persistent store on the pendrive, you can just start Synaptic from the Preferences menu. In Synaptic, first press the Reload button, then choose the "Status" filter and select "Installed (upgradable)". You will then see the set of packages that may be upgraded. Never try to pick them all, but look at the graphics routines, typically modules associated with the X server. Mark them for upgrade, then choose Apply.

    If you don't have persistent store on the pendrive - why not, really?

  8. #8
    I understand what you say but yes: I need to use it without persistence. I normally use a read-only pendrive to be sure that my Knoppix will not be modified or hacked. I don´t use persistence, I only make some minimal changes manually every time I use it (network and some files -openvpn, browser- I include in the pendrive).
    Quote Originally Posted by Capricorny View Post
    If you have persistent store on the pendrive, you can just start Synaptic from the Preferences menu. In Synaptic, first press the Reload button, then choose the "Status" filter and select "Installed (upgradable)". You will then see the set of packages that may be upgraded. Never try to pick them all, but look at the graphics routines, typically modules associated with the X server. Mark them for upgrade, then choose Apply. If you don't have persistent store on the pendrive - why not, really?

  9. #9
    Senior Member registered user
    Join Date
    Sep 2006
    Posts
    802
    Quote Originally Posted by joselb View Post
    I understand what you say but yes: I need to use it without persistence. I normally use a read-only pendrive to be sure that my Knoppix will not be modified or hacked. I don´t use persistence, I only make some minimal changes manually every time I use it (network and some files -openvpn, browser- I include in the pendrive).
    Your concern is not an argument against doing what I suggest, rather the contrary. You can set up a persistent store, but you don't have to use it normally. With the NOIMAGE (if I recall correctly) cheatcode, you start without the persistent store, and that would be your default configuration. But you engage the persistent store for doing modifications to the system, like updating modules, tightening security, set up default accounts etc. And then you run the copy-to-flash routine _with_ the remastering option. Your changes will then be rolled into a new overlay, and you can have a new persistent store set up. And when you subsequently start Knoppix without using the persistent store, your changes will be in effect - no changes needed on startup if you use the ordinary configuration. This process may be repeated several times if you need to update your Knopppix - security updates for the browser is a typical reason for having a new overlay created.
    When you run without persistent store, you don't need to have the knoppix-data.img file present on the drive. It may be good practice to have it present only when you do system manintenance. If a version then crops up after it has been moved, you know somebody has tried to tamper with your system.

  10. #10
    Please tell me more about the "copy-to-flash routine _with_ the remastering option". I don't know how to use it. Thanks for the answer, I didn't know I could do that.
    Quote Originally Posted by Capricorny View Post
    Your concern is not an argument against doing what I suggest, rather the contrary. You can set up a persistent store, but you don't have to use it normally. With the NOIMAGE (if I recall correctly) cheatcode, you start without the persistent store, and that would be your default configuration. But you engage the persistent store for doing modifications to the system, like updating modules, tightening security, set up default accounts etc. And then you run the copy-to-flash routine _with_ the remastering option. Your changes will then be rolled into a new overlay, and you can have a new persistent store set up. And when you subsequently start Knoppix without using the persistent store, your changes will be in effect - no changes needed on startup if you use the ordinary configuration. This process may be repeated several times if you need to update your Knopppix - security updates for the browser is a typical reason for having a new overlay created. When you run without persistent store, you don't need to have the knoppix-data.img file present on the drive. It may be good practice to have it present only when you do system manintenance. If a version then crops up after it has been moved, you know somebody has tried to tamper with your system.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


IBM Power8 S822L Storage Server 8247-22L - With Ram, Some Cards, No HDD's picture

IBM Power8 S822L Storage Server 8247-22L - With Ram, Some Cards, No HDD's

$399.95



IBM SYSTEM X3500 M3 SERVER 7380AC1 2*XEON E5620 2.4GHz 8GB SEE NOTES picture

IBM SYSTEM X3500 M3 SERVER 7380AC1 2*XEON E5620 2.4GHz 8GB SEE NOTES

$33.21



IBM 8284-22A S822 Dual Power8 Cpu 512Gb (16x 32Gb) RAM  picture

IBM 8284-22A S822 Dual Power8 Cpu 512Gb (16x 32Gb) RAM

$795.00



IBM Power S822 12-Bay Server System Power8 Core 3.42Ghz DVD-Rom Drive 64GB No HD picture

IBM Power S822 12-Bay Server System Power8 Core 3.42Ghz DVD-Rom Drive 64GB No HD

$399.99



IBM Lenovo X3650 M5 2U 8x 2.5” CTO Rack Server – 2x HS, 2x 750W picture

IBM Lenovo X3650 M5 2U 8x 2.5” CTO Rack Server – 2x HS, 2x 750W

$199.00



IBM x3650 M4 2x Xeon E5-2670 2.6ghz 16-Core / 64GB / M5110e / 2x PSU picture

IBM x3650 M4 2x Xeon E5-2670 2.6ghz 16-Core / 64GB / M5110e / 2x PSU

$129.99



IBM Power S822 8284-22A 12SFF Power8 3.89GHz 6-Core 64GB RAM No Bezel/HDD Server picture

IBM Power S822 8284-22A 12SFF Power8 3.89GHz 6-Core 64GB RAM No Bezel/HDD Server

$359.99



IBM X3650 M5 5462-AC1,2 X E5-2640V3 2.6GHZ 8C, 16 GB, DUAL 750W, 2 X 1TB SERVER picture

IBM X3650 M5 5462-AC1,2 X E5-2640V3 2.6GHZ 8C, 16 GB, DUAL 750W, 2 X 1TB SERVER

$249.99



IBM 8203 E4A p520 Server 8203-E4A 4.2GHz 2-Core POWER6 32GB RAM / NO HDD USED picture

IBM 8203 E4A p520 Server 8203-E4A 4.2GHz 2-Core POWER6 32GB RAM / NO HDD USED

$119.99



IBM System X 3250 M5 Single Xeon Quad Core E3-1220 v3 @3.1GHz,8GB RAM,Linux SUSE picture

IBM System X 3250 M5 Single Xeon Quad Core E3-1220 v3 @3.1GHz,8GB RAM,Linux SUSE

$199.87