Not sure I follow you here. Does Knoppix boot ok and then when you try to use OO it crashes the Xserver? Or does Knoppix just not boot for you? How about some hardware specs? System RAM, cpu etc.
howdy- i'm new to knoppix but know a bit about linux.
trying to help a friend out here, they want to be able to use OpenOffice and the console mostly. i tried the default settings; black screen- same with desktop=xfce.
am i asking too much out of a 4 meg card?
any lightweight desktops out there that could run OO?
all help appreciated.
thanks,
nomex
edit: added comment below
well, i reread the faq's and read all 76 posts in hardware with the word "video" in them and i found some clues. i guess i saw "very new (or exotic) graphics cards" in the faq and didn't think this one qualified.
possible fixes:
knoppix vga=normal
ctrl alt + or - (after boot. on-the-fly screen-resolution change)
knoppix xvrefresh=60
knoppix xvrefresh=75
knoppix xmodule=vesa
knoppix noddc
knoppix resolution=1024x768 (or 640x480 or 800x600)
knoppix xmodule=ati|radeon|fbdev|vesa|savage|s3|nv (i take it nv is the correct choice in this case?)
knoppix xmodule=fbdev
knoppix xserver=XF86_SVGA
knoppix xmodule=mga
and combinations of the above.
i'll post after i try these.
nomex
Not sure I follow you here. Does Knoppix boot ok and then when you try to use OO it crashes the Xserver? Or does Knoppix just not boot for you? How about some hardware specs? System RAM, cpu etc.
That's not a problem -- 4 MB is plenty. That's what I have on my SiS620-based board.Originally Posted by nomex
thanks for the replies-
knoppix seemed to boot fine, but then black screen.
i tried a bunch of the codes, and "ctrl alt -" twice brought up the desktop,
so i knew i was up and running, and xmodule=fbdev at the 'boot:' prompt
did the trick (but i don't know what exactly it is!).
the system is a 650 duron, 256Mb ram, with an old 14" 'daytek' monitor,
and i wasn't sure kde or OO would work.
is there any way to speed up the OO startup process?
thanks,
nomex
So the problem is your VGA-only monitor. It only supports 640 x 480 resolution. Use the cheat-code for that for now, then go for a better monitor.Originally Posted by nomex
I don't know of any way to speed up OOo, unfortunately -- at least from the CD.
Put about a GB of ram in there and maybe it will start in under a minute and that would be on a HD install, OO is an absolute dog on startup.Originally Posted by nomex
New Precision DWDM SFP+ 10G 80km Tunable Transceiver 50GHz C-Temp DWDM-SFP10G-C
$90.00
New Cisco SFP-25G-SR-S 25G SFP28 25GBASE-SR 850nm 300m LC MMF Transceiver Module
$51.30
LOT OF 10 HPE JD092B X130 10G SFP+ LC SR Transceiver
$40.00
NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*
$16.80
🔥🔥🔥 CISCO SFP-10G-SR V03 10-2415-03 850nm 10GBASE-SR SFP+ Multi Module 🔥🔥🔥
$6.80
SFP-H10GB-CU3M Cisco 10GB SFP+ Twinax Copper 3M Passive Cable
$7.99
HP 560SFP+ 2-Port 10GB SFP+ PCIe (High Profile) Network Adapter Card 669279-001
$12.49
GENUINE Cisco SFP-10G-SR V03 SFP+ GBIC Transceiver Module 10-2415-03
$6.80
Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$20.99
New Cisco GLC-TE 1G SFP Copper RJ45 100m 1000BASE-T Transceiver Module
$22.32