Not sure I follow you here. Does Knoppix boot ok and then when you try to use OO it crashes the Xserver? Or does Knoppix just not boot for you? How about some hardware specs? System RAM, cpu etc.
howdy- i'm new to knoppix but know a bit about linux.
trying to help a friend out here, they want to be able to use OpenOffice and the console mostly. i tried the default settings; black screen- same with desktop=xfce.
am i asking too much out of a 4 meg card?
any lightweight desktops out there that could run OO?
all help appreciated.
thanks,
nomex
edit: added comment below
well, i reread the faq's and read all 76 posts in hardware with the word "video" in them and i found some clues. i guess i saw "very new (or exotic) graphics cards" in the faq and didn't think this one qualified.![]()
possible fixes:
knoppix vga=normal
ctrl alt + or - (after boot. on-the-fly screen-resolution change)
knoppix xvrefresh=60
knoppix xvrefresh=75
knoppix xmodule=vesa
knoppix noddc
knoppix resolution=1024x768 (or 640x480 or 800x600)
knoppix xmodule=ati|radeon|fbdev|vesa|savage|s3|nv (i take it nv is the correct choice in this case?)
knoppix xmodule=fbdev
knoppix xserver=XF86_SVGA
knoppix xmodule=mga
and combinations of the above.
i'll post after i try these.
nomex
Not sure I follow you here. Does Knoppix boot ok and then when you try to use OO it crashes the Xserver? Or does Knoppix just not boot for you? How about some hardware specs? System RAM, cpu etc.
That's not a problem -- 4 MB is plenty. That's what I have on my SiS620-based board.Originally Posted by nomex
thanks for the replies-
knoppix seemed to boot fine, but then black screen.
i tried a bunch of the codes, and "ctrl alt -" twice brought up the desktop,
so i knew i was up and running, and xmodule=fbdev at the 'boot:' prompt
did the trick (but i don't know what exactly it is!).
the system is a 650 duron, 256Mb ram, with an old 14" 'daytek' monitor,
and i wasn't sure kde or OO would work.
is there any way to speed up the OO startup process?
thanks,
nomex
So the problem is your VGA-only monitor. It only supports 640 x 480 resolution. Use the cheat-code for that for now, then go for a better monitor.Originally Posted by nomex
I don't know of any way to speed up OOo, unfortunately -- at least from the CD.
Put about a GB of ram in there and maybe it will start in under a minute and that would be on a HD install, OO is an absolute dog on startup.Originally Posted by nomex
for Laptops 500GB-4TB Internal Solid State Drive Hard Disk 2.5 Inch SSD Drive
$75.18
Netac 1TB 2TB 512GB Internal SSD 2.5'' SATA III 6Gb/s Solid State Drive lot
$119.99
Fanxiang SSD 4TB 2TB 1TB 512GB SATA SSD 2.5'' III Internal Solid State Drive lot
$108.29
Samsung 860EVO 500GB 2.5" Laptop SATA Solid State Drive V-NAND SSD Tested, Wiped
$34.99
Patriot P210 128GB 256GB 512GB 1TB 2TB 2.5" SATA 3 6GB/s Internal SSD PC/MAC Lot
$19.99
SAMSUNG 256GB 2.5" SATA SSD MZ-7LN256D, Grade A, SKU 10394
$14.99
Fanxiang 4TB 2TB 1TB SSD 550MB/s 2.5'' SATA III Internal Solid State Drive lot
$13.99
Fanxiang M.2 SATA SSD 2TB 1TB 512GB 256GB SSD Internal M2 Solid State Drive Lot
$21.99
4tb Ssd 870evo Internal Solid State Drive Hard Disk 2.5 Inch Sata SSD For Laptop
$47.79
Netac 2TB 1TB 512GB 240GB Internal SSD 2.5'' SATAIII 6Gb/s Solid State Drive lot
$118.99