-
I'm going to bother you a lot and I hope I could find the answer here: When I do netcardconfig I get "have found a netcard but not supported", knoppix is already copied to a hard drive and when I just run the cd, that find, it configures the network card autom.. using dhcp.
Any help please
-
More info?
What type of card is it? When you boot with the CD take note of all the modules loaded (use lsmod). When you boot from the hard drive see if all the modules are loaded and if any netowrk ones are missing do insmod modulename. You might want to inquire in the hardware topic about this one.
-
This is what I get when I do the lsmod and I see the sis900 and to my knowledge personal that it should be... If you could tell me what should be.... thanks...
knoppix@ttyp0[knoppix]$ lsmod
Module Size Used by Not tainted
nls_iso8859-1 2876 0 (autoclean)
nls_cp437 4380 0 (autoclean)
autofs4 9948 1 (autoclean)
af_packet 14632 0 (autoclean)
reiserfs 164400 0 (autoclean)
ext3 63744 0 (autoclean)
jbd 46308 0 (autoclean) [ext3]
agpgart 35840 0 (unused)
trident 33140 0
ac97_codec 11176 0 [trident]
soundcore 3428 2 [trident]
pcigame 1384 0 [trident]
gameport 1292 0 [pcigame]
sis900 12780 1
serial 52868 1 (autoclean)
usb-ohci 18216 0 (unused)
usbcore 61920 1 [usb-ohci]
apm 10028 2
rtc 7452 0 (autoclean)
cloop 5648 1
-
Senior Member
registered user
Originally Posted by
qman_txun
This is what I get when I do the lsmod and I see the sis900 and to my knowledge personal that it should be... If you could tell me what should be.... thanks...
knoppix@ttyp0[knoppix]$ lsmod
Module Size Used by Not tainted
sis900 12780 1
The card is there and being used what does ifconfig -a in a console window from the HD tell you does it have an IP similar to what it would be from the cd. Also check the file /etc/network/interfaces to check for DHCP and the card being enabled on boot. example file.
Code:
# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
# The loopback interface
# automatically added when upgrading
auto lo eth0
iface lo inet loopback
iface eth0 inet dhcp
-
I got this when I'm running the cd, however, when I do the samething with the HD there's nothing shows up and if I do insmod it just gives a buch of options. remember when I do netcardconfig in the HD it says that if found a networking but not supported...
-
Sr. qman_txun
Por favor, comunica conmigo directamenta a kudzu99@netzero.net
Ingles o Espaņol. !Que pasas un buen dia! KUDZU (Un gringo r-r-r-u-c-o)
Similar Threads
-
By tjudycki in forum Hardware & Booting
Replies: 6
Last Post: 02-28-2005, 12:38 AM
-
By truefate in forum Hardware & Booting
Replies: 1
Last Post: 09-16-2004, 04:25 AM
-
By rayesteq in forum Networking
Replies: 0
Last Post: 09-14-2004, 04:47 PM
-
By mehlng in forum Hardware & Booting
Replies: 0
Last Post: 10-07-2003, 08:31 AM
-
By Panik in forum General Support
Replies: 3
Last Post: 12-20-2002, 10:09 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
NEW SonicWALL TZ350 02-SSC-0942 1.0 Gbps 5x 1GB RJ-45 Firewall
$199.99
SONICWALL TZ270 Network Firewall With Power Cable *READY TO REGISTER*
$150.00
Palo Alto Networks PA-820 Enterprise Network Firewall Used
$110.00
Fortinet Fortigate-60E Network Security Firewall FG-60E Power Cord Locked / Used
$58.90
Lanner NCA-1010B 3 Port Fanless Mini OPNsense Firewall E3825 4GB RAM 32GB SSD
$99.95
Ubiquiti M/N USG Unifi Security Gateway 1000Mbps Gigabit Firewall & Power Plug
$75.00
pfSense Firewall VPN AES-NI Celeron N3350 1.10GHz 10GB RAM 80GB SSD 5x Intel NIC
$91.00
Fortinet FortiGate 100D FG-100D 16-Port Ethernet Security Firewall Appliance
$49.99
Cisco Firepower 1000 Series FPR-1010 Network Security/Firewall
$250.00
FORTINET FORTIGATE 40F Next GEN Firewall Security Unregistered (FG-40F)-Open Box
$224.99