-
I'm going to bother you a lot and I hope I could find the answer here: When I do netcardconfig I get "have found a netcard but not supported", knoppix is already copied to a hard drive and when I just run the cd, that find, it configures the network card autom.. using dhcp.
Any help please
-
More info?
What type of card is it? When you boot with the CD take note of all the modules loaded (use lsmod). When you boot from the hard drive see if all the modules are loaded and if any netowrk ones are missing do insmod modulename. You might want to inquire in the hardware topic about this one.
-
This is what I get when I do the lsmod and I see the sis900 and to my knowledge personal that it should be... If you could tell me what should be.... thanks...
knoppix@ttyp0[knoppix]$ lsmod
Module Size Used by Not tainted
nls_iso8859-1 2876 0 (autoclean)
nls_cp437 4380 0 (autoclean)
autofs4 9948 1 (autoclean)
af_packet 14632 0 (autoclean)
reiserfs 164400 0 (autoclean)
ext3 63744 0 (autoclean)
jbd 46308 0 (autoclean) [ext3]
agpgart 35840 0 (unused)
trident 33140 0
ac97_codec 11176 0 [trident]
soundcore 3428 2 [trident]
pcigame 1384 0 [trident]
gameport 1292 0 [pcigame]
sis900 12780 1
serial 52868 1 (autoclean)
usb-ohci 18216 0 (unused)
usbcore 61920 1 [usb-ohci]
apm 10028 2
rtc 7452 0 (autoclean)
cloop 5648 1
-
Senior Member
registered user
Originally Posted by
qman_txun
This is what I get when I do the lsmod and I see the sis900 and to my knowledge personal that it should be... If you could tell me what should be.... thanks...
knoppix@ttyp0[knoppix]$ lsmod
Module Size Used by Not tainted
sis900 12780 1
The card is there and being used what does ifconfig -a in a console window from the HD tell you does it have an IP similar to what it would be from the cd. Also check the file /etc/network/interfaces to check for DHCP and the card being enabled on boot. example file.
Code:
# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
# The loopback interface
# automatically added when upgrading
auto lo eth0
iface lo inet loopback
iface eth0 inet dhcp
-
I got this when I'm running the cd, however, when I do the samething with the HD there's nothing shows up and if I do insmod it just gives a buch of options. remember when I do netcardconfig in the HD it says that if found a networking but not supported...
-
Sr. qman_txun
Por favor, comunica conmigo directamenta a kudzu99@netzero.net
Ingles o Espaol. !Que pasas un buen dia! KUDZU (Un gringo r-r-r-u-c-o)
Similar Threads
-
By tjudycki in forum Hardware & Booting
Replies: 6
Last Post: 02-28-2005, 12:38 AM
-
By truefate in forum Hardware & Booting
Replies: 1
Last Post: 09-16-2004, 04:25 AM
-
By rayesteq in forum Networking
Replies: 0
Last Post: 09-14-2004, 04:47 PM
-
By mehlng in forum Hardware & Booting
Replies: 0
Last Post: 10-07-2003, 08:31 AM
-
By Panik in forum General Support
Replies: 3
Last Post: 12-20-2002, 10:09 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
N85XX DELL 3.84TB SAS 12GB/S ENTERPRISE SOLID STATE DRIVE (W/ 14TH GEN CADDY)
$389.95
WD 500GB My Passport SSD, Portable External Solid State Drive WDBAGF5000ARD-WESN
$59.99
Western Digital 1TB WD Blue SA510 SATA SSD Internal 2.5”/7mm Cased - WDS100T3B0A
$89.99
Western Digital 250GB WD Blue SA510 SATA SSD, Internal M.2 2280 - WDS250G3B0B
$39.99
Patriot P210 128GB 256GB 512GB 1TB 2TB 2.5" SATA 3 6GB/s Internal SSD PC/MAC Lot
$14.99
Micron 5100 MAX 120GB SATA 6Gb/s 2.5" Internal SSD MTFDDAK120TCC Solid State
$9.89
Netac 1TB 2TB 512GB Internal SSD 2.5'' SATA III 6Gb/s Solid State Drive lot
$13.99
Fanxiang SSD 512GB 1TB 2TB 4TB 2.5'' SSD SATA III Internal Solid State Drive lot
$13.99
Fanxiang SSD 512GB 1TB 2TB 4TB 2.5''SATA III Internal Solid State Hard Drive LOT
$188.99
M.2 NVMe SSD 128GB 256GB 512GB Single Notch with Windows Installed 10 / 11
$85.25