I've been looking for a way to get Knoppix to work on my Fujitsu Lifebook P-2040 which uses a Transmeta Crusoe processor. The boot process would freeze when loading the ALI3X* driver. I found a workaround is to disable this by putting the IDE devices into ATA66 mode.
Issuing 'knoppix ide0=ata66 ide1=ata66' at start will allow Knoppix to work properly on a Fujitsu Lifebook and presumably other platforms that use the Crusoe processor.
Kudos go to martin dempsey for the answer:
http://thcnet.net/pipermail/lvlug/20...er/008230.html
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$34.50
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99
1TB HDD/SSD 2.5" SATA Hard Drive with Windows 10 or Windows 11 Pro Installed
$44.55
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$74.99
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$99.99
Seagate Exos X20 18TB SATA 6Gb/s 3.5" Enterprise Hard Drive - ST18000NM003D
$168.00
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$119.99
ST4000NM0023 Seagate CONSTELLATION 4TB 7200RPM 6Gbps 3.5" SATA HDD Hard Drive
$52.49
Western Digital Gold Enterprise 4TB,7200 RPM Internal Hard Disk Drive WD4002FYYZ
$39.95