-
"bootfrom=Knoppix810.iso" does not accept Network ((the mine!)
Hi
Does anbody had ever tried the cheatcode
: "bootfrom=knoppix810.iso ?
The mine can not accept the INTERNET T
hanks for ideas
knp
Last edited by knp; 09-17-2018 at 09:55 PM.
-
When booting Knoppix from the ISO file, the bootng process
1) searches for the ISO file (knoppix810.iso) in the root of the detected file systems
2) if the ISO file is found, it mounts the ISO file on /mnt-system
3) searches for /mnt-system/KNOPPIX/KNOPPIX
4) if /mnt-system/KNOPPIX/KNOPPIX is found to be a cloop file, it mounts this on /KNOPPIX
5) if /KNOPPIX contains the KNOPPIX file system, the boot process switches to this and continues loading KNOPPIX
6) Knoppix runs the initializing process and loads the graphics interface
7) if wired Ethernet is detected, Knoppix connects to the wired Ethernet and uses DHCP to get an address.
Knoppix is now running without your personal settings,so wireless networks are NOT connected. You have to connect it manually to a wireless network.
How far in this boot process do you get ?
-
Thanks Fredvdj
Perhaps I have not been sufficiently clear
My "iso_file" booted almost "very well".
As it would do
I always get "all" the functionnalities I need
BUT the the wired connection at all!!!
Even when the cable is previously connected!
I think I must try to get ANOTHER "iso_file"
Maybe the mine is somewhat corrupted
because yours seems to work.
I shall return you tagain as soon as possible...
Thanks you very much
-
H fredvej 1_ Effectively my "8.1.ISO" was corrupted2- But the new one (even when burned on DVD) has also some "problems": a- NO cursor at all for cheatcodes b- No "search_Tool" c- Impossible to detect ftaining the informations relative to "kmail" d- Incompatibilty with "older kmail" messagesByeknp
-
H fredvej 1_ Effectively my "8.1.ISO" was corrupted2- But the new one (even when burned on DVD) has also some "problems": a- NO cursor at all for cheatcodes b- No "search_Tool" c- Impossible to detect ftaining the informations relative to "kmail" d- Incompatibilty with "older kmail" messagesByeknp
-
To avoid corrupted downloads I always use the torrents, because this download method verifys itself. The Knoppix torrents also contains checksums for checking.
I cannot help you with your other problems. You should start a new thread with those.
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
ORICO 5 Bay Raid USB3.0 to SATA External Hard Drive Enclosure for 3.5'' HDD LOT
$140.79
Dell EMC 092GD6 Broadcom 9305-16i LSI Quad Port 4 Port SAS RAID Controller
$84.99
Drobo DR04D-U External Data Backup Storage Raid Hard Drive 4 Bay NAS USB
$42.50
OWC Guardian Maximus Raid Enclosure SATA Hard Drive FireWire
$36.99
Inspur LSI YZCA-00424-101 Raid Card 12Gbps HBA Controller Low Profile 9300-8i IT
$15.98
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 4Y5H1 High Profile
$15.99
9207-8i PCIE3.0 6Gbps HBA LSI FW:P20 IT Mode ZFS FreeNAS unRAID 2* SFF-8087 US
$32.88
G-Technology G-SPEED Studio XL 60TB 8-Bay Thunderbolt 2 RAID Array (6*10TB)
$650.00
Yottamaster 5 Bay RAID Hard Drive Enclosure Type-C B For 2.5" 3.5" SATA HDD SSDs
$131.59
Yottamaster 2 Bay RAID Hard Drive Enclosure USB 3.1 Type B For 3.5" SATA HDDs
$69.91