-
"bootfrom=Knoppix810.iso" does not accept Network ((the mine!)
Hi
Does anbody had ever tried the cheatcode
: "bootfrom=knoppix810.iso ?
The mine can not accept the INTERNET T
hanks for ideas
knp
Last edited by knp; 09-17-2018 at 09:55 PM.
-
When booting Knoppix from the ISO file, the bootng process
1) searches for the ISO file (knoppix810.iso) in the root of the detected file systems
2) if the ISO file is found, it mounts the ISO file on /mnt-system
3) searches for /mnt-system/KNOPPIX/KNOPPIX
4) if /mnt-system/KNOPPIX/KNOPPIX is found to be a cloop file, it mounts this on /KNOPPIX
5) if /KNOPPIX contains the KNOPPIX file system, the boot process switches to this and continues loading KNOPPIX
6) Knoppix runs the initializing process and loads the graphics interface
7) if wired Ethernet is detected, Knoppix connects to the wired Ethernet and uses DHCP to get an address.
Knoppix is now running without your personal settings,so wireless networks are NOT connected. You have to connect it manually to a wireless network.
How far in this boot process do you get ?
-
Thanks Fredvdj
Perhaps I have not been sufficiently clear
My "iso_file" booted almost "very well".
As it would do
I always get "all" the functionnalities I need
BUT the the wired connection at all!!!
Even when the cable is previously connected!
I think I must try to get ANOTHER "iso_file"
Maybe the mine is somewhat corrupted
because yours seems to work.
I shall return you tagain as soon as possible...
Thanks you very much
-
H fredvej 1_ Effectively my "8.1.ISO" was corrupted2- But the new one (even when burned on DVD) has also some "problems": a- NO cursor at all for cheatcodes b- No "search_Tool" c- Impossible to detect ftaining the informations relative to "kmail" d- Incompatibilty with "older kmail" messagesByeknp
-
H fredvej 1_ Effectively my "8.1.ISO" was corrupted2- But the new one (even when burned on DVD) has also some "problems": a- NO cursor at all for cheatcodes b- No "search_Tool" c- Impossible to detect ftaining the informations relative to "kmail" d- Incompatibilty with "older kmail" messagesByeknp
-
To avoid corrupted downloads I always use the torrents, because this download method verifys itself. The Knoppix torrents also contains checksums for checking.
I cannot help you with your other problems. You should start a new thread with those.
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Cenmate 2 Bay Raid Hard Drive Enclosure
$71.99

OWC 8TB Gemini Thunderbolt 3 Dock and RAID Station (2X4TB) OWCTB3RSDK08T
$339.00

4 Bay 3.5Ó SATA III HDD NON-RAID Enclosure Ð Supports USB 3.0 & eSATA Interface
$120.98

8 Bay Tool Less Tray Hot Swap 2.5" 3.5" SATA Non Raid External USB 3.0 Enclosure
$251.99

LSI MegaRAID SAS 9271-8i 8-Port 6Gb/s SATA/SAS 1GB PCI-E 3.0 RAID Controller
$29.95

ADAPTEC ASR-7805 Single 6gb/s 8int Port SAS/SATA Raid Controller With Cache
$12.00

Dell H810 Perc SAS RAID Controller 1GB Cache 6Gbps (PN: VV648 0VV648 CN-0VV648)
$17.99

ADAPTEC ASR-71605 SFF8643 16 PORT SAS SATA 6Gb/s HBA/RAID CARD High Profile
$45.00

G-SPEED ES 4-Bay RAID Enclosure Storage Array Tested and Working No Hard Drives
$80.00

NDD93 DELL PERC H810 1GB 6GPS SAS SATA RAID CONTROLLER WITH BATTERY 0NDD93
$49.99