Dear All -
If I use the command fdisk -l I get the usual and expected output of the style
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 131604479 131602432 62.8G 7 HPFS/NTFS/exFAT
/dev/sda2 131604480 1180327679 1048723200 500.1G 7 HPFS/NTFS/exFAT
/dev/sda3 1180327680 2229050879 1048723200 500.1G 7 HPFS/NTFS/exFAT
My question concerns the line
/dev/sda1 * 2048 131604479 131602432 62.8G 7 HPFS/NTFS/exFAT
Surely that means that /dev/sda1 starts at sector number 2048 and that there are 2,048 sectors at the start of /dev/sda (yes, numbered 0000-2047) allocated otherwise?
For various reasons I want to zero these initial sectors of /dev/sda using the command
dd if=/dev/zero of=/dev/sda count=2048
but to my annoyance (and very considerable damage to the system) this also zeroes the first sector of /dev/sda1.
That is, the dd command zeroes not just those sectors numbered 0000-2047 but also the sector numbered 2048: so 2049 altogether. not 2048.
I am absolutely convinced that my understanding of counts / numbers / numbering as described above was correct under 7.4.2 and that I issued commands, many times, in the manner describe without damaging /dev/sda1; (but I am a bit nervous now about checking that)!
Can anybody conform that I am right? That I am wrong? That dd under 8.2.0 is glitchy?
Thank you!
Fergus
PS And by the way (completely different and unconnected) I find the file /boot/isolinux/ifcpu64.c32 is broken in the 8.2.0 installation and I have to over-write it with the same file from 7.4.2 for things to work properly. Anybody else?
Fergus
CISCO MCS 7800 (2x) Intel Xeon @ 2.33 GHz 4GB Ram, NO HDD
$59.99
DELL PowerEdge R730XD 24x 2.5" Server Dual 750W Dual Heatsink - BareBones TESTED
$269.99
HP ProLiant DL360 G9 Server 2x E5-2660v3 2.60Ghz 20-Core 96GB P440ar
$304.35
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$721.06
Intel Xeon E5-2680 v4 2.4GHz 35MB 14-Core 120W LGA2011-3 SR2N7
$17.99
Intel Xeon Gold 6140 SR3AX 2.3GHz 18-Core Processor CPU
$44.99
INTEL XEON GOLD 6148 2.40 GHz SR3B6 CPU
$98.99
Intel Xeon E5-2697 v2 2.7GHz 30M 12-Core LGA2011 CPU Processor SR19H
$27.99
HP ProLiant DL380 Gen9 16SFF 2x E5-2680v4 2.4GHz =28 Cores 64GB P840 4xRJ45
$353.00
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$274.00