Dear All -
If I use the command fdisk -l I get the usual and expected output of the style
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 131604479 131602432 62.8G 7 HPFS/NTFS/exFAT
/dev/sda2 131604480 1180327679 1048723200 500.1G 7 HPFS/NTFS/exFAT
/dev/sda3 1180327680 2229050879 1048723200 500.1G 7 HPFS/NTFS/exFAT
My question concerns the line
/dev/sda1 * 2048 131604479 131602432 62.8G 7 HPFS/NTFS/exFAT
Surely that means that /dev/sda1 starts at sector number 2048 and that there are 2,048 sectors at the start of /dev/sda (yes, numbered 0000-2047) allocated otherwise?
For various reasons I want to zero these initial sectors of /dev/sda using the command
dd if=/dev/zero of=/dev/sda count=2048
but to my annoyance (and very considerable damage to the system) this also zeroes the first sector of /dev/sda1.
That is, the dd command zeroes not just those sectors numbered 0000-2047 but also the sector numbered 2048: so 2049 altogether. not 2048.
I am absolutely convinced that my understanding of counts / numbers / numbering as described above was correct under 7.4.2 and that I issued commands, many times, in the manner describe without damaging /dev/sda1; (but I am a bit nervous now about checking that)!
Can anybody conform that I am right? That I am wrong? That dd under 8.2.0 is glitchy?
Thank you!
Fergus
PS And by the way (completely different and unconnected) I find the file /boot/isolinux/ifcpu64.c32 is broken in the 8.2.0 installation and I have to over-write it with the same file from 7.4.2 for things to work properly. Anybody else?
Fergus
Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig UPOE Network Switch, no module
$279.97
Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig Copper UPOE Network Switch
$475.00
Cisco WS-C2960X-48FPD-L 48 V07 POE+ GE+2 10G SFP+, LAN BASE 740W w/ C2960X-Stack
$140.00
Cisco 3560CG Series 8 Port POE Network Switch WS-C3560CG-8PC-S
$80.00
🔥🔥🔥 CISCO SFP-10G-SR V03 10-2415-03 850nm 10GBASE-SR SFP+ Multi Module 🔥🔥🔥
$6.80
GENUINE Cisco SFP-10G-SR V03 SFP+ GBIC Transceiver Module 10-2415-03
$6.80
Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850
$30.99
Cisco C3850-NM-4-10G 4 Port Network Exp.Module for 3850
$124.90
Lot of 10 Cisco Meraki MS220-8P-HW 8 Port Desktop Ethernet Switch - UNCLAIMED
$416.95
Cisco WS-C3560CX-12PC-S 12 Port GbE PoE IP Base Catalyst Managed Switch, TESTED
$174.00