Dear All -
If I use the command fdisk -l I get the usual and expected output of the style
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 131604479 131602432 62.8G 7 HPFS/NTFS/exFAT
/dev/sda2 131604480 1180327679 1048723200 500.1G 7 HPFS/NTFS/exFAT
/dev/sda3 1180327680 2229050879 1048723200 500.1G 7 HPFS/NTFS/exFAT
My question concerns the line
/dev/sda1 * 2048 131604479 131602432 62.8G 7 HPFS/NTFS/exFAT
Surely that means that /dev/sda1 starts at sector number 2048 and that there are 2,048 sectors at the start of /dev/sda (yes, numbered 0000-2047) allocated otherwise?
For various reasons I want to zero these initial sectors of /dev/sda using the command
dd if=/dev/zero of=/dev/sda count=2048
but to my annoyance (and very considerable damage to the system) this also zeroes the first sector of /dev/sda1.
That is, the dd command zeroes not just those sectors numbered 0000-2047 but also the sector numbered 2048: so 2049 altogether. not 2048.
I am absolutely convinced that my understanding of counts / numbers / numbering as described above was correct under 7.4.2 and that I issued commands, many times, in the manner describe without damaging /dev/sda1; (but I am a bit nervous now about checking that)!
Can anybody conform that I am right? That I am wrong? That dd under 8.2.0 is glitchy?
Thank you!
Fergus
PS And by the way (completely different and unconnected) I find the file /boot/isolinux/ifcpu64.c32 is broken in the 8.2.0 installation and I have to over-write it with the same file from 7.4.2 for things to work properly. Anybody else?
Fergus
Silicom (PE210G2SPI9A-XR) 10Gb Dual Port SFP+ PCIe Ethernet Adapter Low Profile
$19.99
SFP-10G-LR Compatible 10GBase-LR SFP+ LR Transceiver 10G 1310nm SMF up ot 10km
$45.00
57-1000333-01 Brocade XBR-000212 32G Multi-mode SFP
$29.00
Cisco SG110 24 Port Gigabit Ethernet Switch w/ 2 x SFP SG110-24
$117.00
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
F5 Networks 10GB OPT-0016-00 F5-UPG-SFP+-R 10GBASE/SR SFP Transceiver
$4.00
NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*
$18.00
Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$13.89
Cisco Meraki MA-SFP-10GB-SR 10G SFP+ SR 850nm 300m LC MMF
$29.99
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$89.00