Dear All -
If I use the command fdisk -l I get the usual and expected output of the style
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 131604479 131602432 62.8G 7 HPFS/NTFS/exFAT
/dev/sda2 131604480 1180327679 1048723200 500.1G 7 HPFS/NTFS/exFAT
/dev/sda3 1180327680 2229050879 1048723200 500.1G 7 HPFS/NTFS/exFAT
My question concerns the line
/dev/sda1 * 2048 131604479 131602432 62.8G 7 HPFS/NTFS/exFAT
Surely that means that /dev/sda1 starts at sector number 2048 and that there are 2,048 sectors at the start of /dev/sda (yes, numbered 0000-2047) allocated otherwise?
For various reasons I want to zero these initial sectors of /dev/sda using the command
dd if=/dev/zero of=/dev/sda count=2048
but to my annoyance (and very considerable damage to the system) this also zeroes the first sector of /dev/sda1.
That is, the dd command zeroes not just those sectors numbered 0000-2047 but also the sector numbered 2048: so 2049 altogether. not 2048.
I am absolutely convinced that my understanding of counts / numbers / numbering as described above was correct under 7.4.2 and that I issued commands, many times, in the manner describe without damaging /dev/sda1; (but I am a bit nervous now about checking that)!
Can anybody conform that I am right? That I am wrong? That dd under 8.2.0 is glitchy?
Thank you!
Fergus
PS And by the way (completely different and unconnected) I find the file /boot/isolinux/ifcpu64.c32 is broken in the 8.2.0 installation and I have to over-write it with the same file from 7.4.2 for things to work properly. Anybody else?
Fergus
Juniper MX104-AC 4 MIC Slot Chassis w/ 2x RE-S-MX104 and 2x PWR-MX104-AC
$1899.00
*New* MIC-MRATE Juniper 12-Port Multi-Rate MIC module
$749.00
Juniper 48-Port GbE PoE+ & 4-Port 10GB SFP+ Network Switch EX3300-48P w/ License
$49.99
Juniper Networks EX2300-24P 24 Port Gigabit PoE 4 SFP 1/10G Network Switch
$119.00
Juniper EX3300-48P, 48 Port PoE+ Gigabit Network Switch w/ Power cord
$54.99
Juniper EX4300-48T 48 Port 1G 4 QSFP 40G Dual PSU AFO w/ Rails, EX-UM-4X4SFP Mod
$169.00
JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER
$315.00
Juniper EX4200-48PX 48-Port Gigabit PoE Switch Dual 930W PSU + EX-UM-2X4SFP
$54.99
Juniper QFX5100-48S 48-Port 10GbE SFP+ 6x40GbE QSFP Network Switch w/Ears Tested
$599.99
Juniper Networks EX4550-32F-AFO 32x 1/10GbE SFP+ Network Switch w/ Power Cords
$299.00