Dear All -
If I use the command fdisk -l I get the usual and expected output of the style
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 131604479 131602432 62.8G 7 HPFS/NTFS/exFAT
/dev/sda2 131604480 1180327679 1048723200 500.1G 7 HPFS/NTFS/exFAT
/dev/sda3 1180327680 2229050879 1048723200 500.1G 7 HPFS/NTFS/exFAT
My question concerns the line
/dev/sda1 * 2048 131604479 131602432 62.8G 7 HPFS/NTFS/exFAT
Surely that means that /dev/sda1 starts at sector number 2048 and that there are 2,048 sectors at the start of /dev/sda (yes, numbered 0000-2047) allocated otherwise?
For various reasons I want to zero these initial sectors of /dev/sda using the command
dd if=/dev/zero of=/dev/sda count=2048
but to my annoyance (and very considerable damage to the system) this also zeroes the first sector of /dev/sda1.
That is, the dd command zeroes not just those sectors numbered 0000-2047 but also the sector numbered 2048: so 2049 altogether. not 2048.
I am absolutely convinced that my understanding of counts / numbers / numbering as described above was correct under 7.4.2 and that I issued commands, many times, in the manner describe without damaging /dev/sda1; (but I am a bit nervous now about checking that)!
Can anybody conform that I am right? That I am wrong? That dd under 8.2.0 is glitchy?
Thank you!
Fergus
PS And by the way (completely different and unconnected) I find the file /boot/isolinux/ifcpu64.c32 is broken in the 8.2.0 installation and I have to over-write it with the same file from 7.4.2 for things to work properly. Anybody else?
Fergus
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00
HPE ProLiant MicroServer Gen8 Intel Xeon E3-1265L 16GB ECC PCIe x16 4x1TB HDD
$249.99
HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVES
$199.99
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon
$846.19
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ*
$94.99
Supermicro 5018A-FTN4 Rack Server - Black
$125.00
Microsel Server Tower Supermicro X10SAE E3-1275 V3 @3.5GHz 16GB 509849-001
$149.99
SUPERMICRO CSE-512 AMD Opteron Processor 6128, 32GB DDR3 RAM NO HDD
$90.00
1U Supermicro Server X10DRU-i+ 2x Xeon E5-2690 V4 28 Cores 64GB 4x 10GBE-T 2PS
$324.00