-
On exit : dirty bit is always set
Earlier versions of KNOPPIX always automatically unmounted any mounted devices on "halt" (init 0) or "reboot" (init 6) if the user had forgotten to do so.
Recently (since at least 7.4.2, maybe a lot earlier) this kind feature was removed; and then, in any future session, attempting to mount an external device, one might get the error message "device not properly unmounted". No problem, easily managed.
But on 8.2.0 I find that the boot device is itself left "dirty". Bu this I mean:
I operate KNOPPIX from a USB boot flash drive /dev/sda1. Every time I start up, if I try
$ dosfsck -r /dev/sda1
then I get
0x41 : Dirty bit is set. Fs was not properly unmounted and some data may be corrupt.
So, on exiting KNOPPIX, not even the boot device (let alone any others mounted during a session) is unmounted. This, surely, is an oversight.
Can anything be done manually just before exit? I tried the obvious "umount /dev/sda1" and "umount /mnt-system" but got the same error message "device is in use".
Any ideas? Thank you for your help!
Fergus
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![Dell EMC 092GD6 Broadcom 9305-16i LSI Quad Port 4 Port SAS RAID Controller picture](/store/img/g/ph8AAOSwnHxmXzcB/s-l225/Dell-EMC-092GD6-Broadcom-9305-16i-LSI-Quad-Port-4-.jpg)
Dell EMC 092GD6 Broadcom 9305-16i LSI Quad Port 4 Port SAS RAID Controller
$84.99
![ORICO 5 Bay Raid USB3.0 to SATA External Hard Drive Enclosure for 3.5'' HDD LOT picture](/store/img/g/m2IAAOSwmz5kyNFT/s-l225/ORICO-5-Bay-Raid-USB3-0-to-SATA-External-Hard-Driv.jpg)
ORICO 5 Bay Raid USB3.0 to SATA External Hard Drive Enclosure for 3.5'' HDD LOT
$167.99
![GLYPH TECHNOLOGIES STUDIO RAID 4TB 2-BAY THUNDERBOLT 2 USB 3 DRIVE USE 21 DAYS picture](/store/img/g/fyYAAOSweLJmgGMF/s-l225/GLYPH-TECHNOLOGIES-STUDIO-RAID-4TB-2-BAY-THUNDERBO.jpg)
GLYPH TECHNOLOGIES STUDIO RAID 4TB 2-BAY THUNDERBOLT 2 USB 3 DRIVE USE 21 DAYS
$132.99
![OWC Guardian Maximus Raid Enclosure SATA Hard Drive FireWire picture](/store/img/g/-FoAAOSwtEBmQ5qa/s-l225/OWC-Guardian-Maximus-Raid-Enclosure-SATA-Hard-Driv.jpg)
OWC Guardian Maximus Raid Enclosure SATA Hard Drive FireWire
$36.99
![ASUS Hyper M.2 x16 Gen 4 RAID Card- Used Working picture](/store/img/g/fGwAAOSwAStmfi9c/s-l225/ASUS-Hyper-M-2-x16-Gen-4-RAID-Card-Used-Working.jpg)
ASUS Hyper M.2 x16 Gen 4 RAID Card- Used Working
$32.95
![Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 4Y5H1 High Profile picture](/store/img/g/C7YAAOSwLYJl3nQQ/s-l225/Dell-PERC-H330-PCIe-3-0-x8-RAID-Storage-Controller.jpg)
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 4Y5H1 High Profile
$17.99
![LSI 8 Port 6Gbps PCIe 3.0 External SAS RAID Card w/ 1GB CacheVault & Low Profile picture](/store/img/g/3oUAAOSweflmcp0x/s-l225/LSI-8-Port-6Gbps-PCIe-3-0-External-SAS-RAID-Card-w.jpg)
LSI 8 Port 6Gbps PCIe 3.0 External SAS RAID Card w/ 1GB CacheVault & Low Profile
$24.65
![LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault picture](/store/img/g/NdcAAOSwlPtmc2X8/s-l225/LSI-MegaRAID-9361-8i-12Gbps-PCIe-3-x8-SATA-SAS-3-8.jpg)
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
![Sans Digital 2 Bay SATA to eSATA/ USB 2.0 RAID JBOD picture](/store/img/g/v8cAAOSwd4tmeQzp/s-l225/Sans-Digital-2-Bay-SATA-to-eSATA-USB-2-0-RAID-JBOD.jpg)
Sans Digital 2 Bay SATA to eSATA/ USB 2.0 RAID JBOD
$79.35
![Yottamaster 5 Bay RAID Hard Drive Enclosure Type-C B For 2.5](/store/img/g/izoAAOSwfCZlZs9y/s-l225/Yottamaster-5-Bay-RAID-Hard-Drive-Enclosure-Type-C.jpg)
Yottamaster 5 Bay RAID Hard Drive Enclosure Type-C B For 2.5" 3.5" SATA HDD SSDs
$131.59