-
On exit : dirty bit is always set
Earlier versions of KNOPPIX always automatically unmounted any mounted devices on "halt" (init 0) or "reboot" (init 6) if the user had forgotten to do so.
Recently (since at least 7.4.2, maybe a lot earlier) this kind feature was removed; and then, in any future session, attempting to mount an external device, one might get the error message "device not properly unmounted". No problem, easily managed.
But on 8.2.0 I find that the boot device is itself left "dirty". Bu this I mean:
I operate KNOPPIX from a USB boot flash drive /dev/sda1. Every time I start up, if I try
$ dosfsck -r /dev/sda1
then I get
0x41 : Dirty bit is set. Fs was not properly unmounted and some data may be corrupt.
So, on exiting KNOPPIX, not even the boot device (let alone any others mounted during a session) is unmounted. This, surely, is an oversight.
Can anything be done manually just before exit? I tried the obvious "umount /dev/sda1" and "umount /mnt-system" but got the same error message "device is in use".
Any ideas? Thank you for your help!
Fergus
-
Hi Fergus,
I am a very very newbie!
I suggest you to exit "PROPERLY ALL APPLICATIONS"
opened ( included those you MIGTH have forgotten!!!!).
before "exiting any SESSION".
I haveencountered almost such a problem with some
older versions.
I used the "trick" completed, sometimes, with the "windows
chkdsk program" (the corresponding of"fsck program"
on the the "Fat Partition"
Good luck !
knp
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 16GB | P204I | 2x300GB 10KRPM
$1419.00
HPE BL460c G10 ProLiant Blade | 2x Silver 4114 | 128GB | P204I | 2x1.2TB 10KRPM
$1869.00
HPE BL460c G10 ProLiant Blade | 2x Silver 4114 | 512GB | P204I | 2x1.2TB 10KRPM
$2699.00
Dell Poweredge M620 Blade Server 2x E5-2680 v2 2.8ghz 20-Cores / 256gb / H710
$499.99
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell PowerEdge M640 Blade Server 2x Xeon Gold 5122 3.6GHz, No RAM, READ _
$402.38
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG
$69.99
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99