-
On exit : dirty bit is always set
Earlier versions of KNOPPIX always automatically unmounted any mounted devices on "halt" (init 0) or "reboot" (init 6) if the user had forgotten to do so.
Recently (since at least 7.4.2, maybe a lot earlier) this kind feature was removed; and then, in any future session, attempting to mount an external device, one might get the error message "device not properly unmounted". No problem, easily managed.
But on 8.2.0 I find that the boot device is itself left "dirty". Bu this I mean:
I operate KNOPPIX from a USB boot flash drive /dev/sda1. Every time I start up, if I try
$ dosfsck -r /dev/sda1
then I get
0x41 : Dirty bit is set. Fs was not properly unmounted and some data may be corrupt.
So, on exiting KNOPPIX, not even the boot device (let alone any others mounted during a session) is unmounted. This, surely, is an oversight.
Can anything be done manually just before exit? I tried the obvious "umount /dev/sda1" and "umount /mnt-system" but got the same error message "device is in use".
Any ideas? Thank you for your help!
Fergus
-
Hi Fergus,
I am a very very newbie!
I suggest you to exit "PROPERLY ALL APPLICATIONS"
opened ( included those you MIGTH have forgotten!!!!).
before "exiting any SESSION".
I haveencountered almost such a problem with some
older versions.
I used the "trick" completed, sometimes, with the "windows
chkdsk program" (the corresponding of"fsck program"
on the the "Fat Partition"
Good luck !
knp
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Juniper Networks EX2300-C-12T Compact 12-Port EX2300-C Series Ethernet Switch
$300.00
Juniper Networks MX80-AC Router 4 Port XFP 10G MIC-3D-200E-SFP
$600.00
Juniper Networks EX3300-24P | 24 Port Gigabit Network Switch w/ Power cord
$53.99
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$59.95
Juniper Networks EX2200-C-12P-2G Gigabit Ethernet Managed Switch
$79.99
Juniper EX3400-48P 48-Ports PoE+ 4x SFP+ and 2x QSFP+ Managed Switch Tested
$135.00
Juniper Networks EX3300-48T 48 Port Gigabit 4x 10 GbE SPF+ Ports Switch - Tested
$40.00
Juniper Networks EX2200 EX2200-C-12T-2G 12-Port Gigabit Switch
$84.95
Juniper Networks EX2300-48P 48 Port Gigabit PoE 4 SFP 1/10G Network Switch
$185.00
Juniper Networks SRX220 8-Port Gigabit Services Gateway Security Appliance
$45.00