Results 1 to 2 of 2

Thread: On exit : dirty bit is always set

  1. #1
    Member registered user
    Join Date
    Dec 2006
    Posts
    45

    On exit : dirty bit is always set

    Earlier versions of KNOPPIX always automatically unmounted any mounted devices on "halt" (init 0) or "reboot" (init 6) if the user had forgotten to do so.
    Recently (since at least 7.4.2, maybe a lot earlier) this kind feature was removed; and then, in any future session, attempting to mount an external device, one might get the error message "device not properly unmounted". No problem, easily managed.
    But on 8.2.0 I find that the boot device is itself left "dirty". Bu this I mean:
    I operate KNOPPIX from a USB boot flash drive /dev/sda1. Every time I start up, if I try
    $ dosfsck -r /dev/sda1
    then I get
    0x41 : Dirty bit is set. Fs was not properly unmounted and some data may be corrupt.
    So, on exiting KNOPPIX, not even the boot device (let alone any others mounted during a session) is unmounted. This, surely, is an oversight.
    Can anything be done manually just before exit? I tried the obvious "umount /dev/sda1" and "umount /mnt-system" but got the same error message "device is in use".
    Any ideas? Thank you for your help!
    Fergus

  2. #2
    Senior Member
    Join Date
    Jan 2012
    Posts
    107
    Hi Fergus,

    I am a very very newbie!

    I suggest you to exit "PROPERLY ALL APPLICATIONS"

    opened ( included those you MIGTH have forgotten!!!!).

    before "exiting any SESSION".

    I haveencountered almost such a problem with some

    older versions.

    I used the "trick" completed, sometimes, with the "windows

    chkdsk program" (the corresponding of"fsck program"

    on the the "Fat Partition"

    Good luck !

    knp

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GBASE-SR SFP+ Multi mode Module picture

SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GBASE-SR SFP+ Multi mode Module

$8.90



New Cisco GLC-TE 1000BASE-T SFP Transceiver Module RJ45 Copper SFP picture

New Cisco GLC-TE 1000BASE-T SFP Transceiver Module RJ45 Copper SFP

$25.18



NEW Sealed Original CISCO SFP-10G-LR SFP TRANSCEIVER MODULE GBIC *US Shipping* picture

NEW Sealed Original CISCO SFP-10G-LR SFP TRANSCEIVER MODULE GBIC *US Shipping*

$25.00



SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GBASE-SR SFP+ Multi mode Module picture

SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GBASE-SR SFP+ Multi mode Module

$7.48



Finisar FTLX8571D3BCL SFP+SR/SW 10Gb/s 850nm Multimode SFP+ Transceiver picture

Finisar FTLX8571D3BCL SFP+SR/SW 10Gb/s 850nm Multimode SFP+ Transceiver

$7.70



Genuine Cisco SFP-10G-SR  TRANSCEIVERS -   picture

Genuine Cisco SFP-10G-SR TRANSCEIVERS -

$8.48



Cisco 1.25Gb 500m 850nm 1000Base-SX SFP Transceiver GLC-SX-MM picture

Cisco 1.25Gb 500m 850nm 1000Base-SX SFP Transceiver GLC-SX-MM

$2.94



Brocade 10G-SFPP-SR 57-0000075-01 XBR-000180 Ethernet SR SFP+ 200pcs picture

Brocade 10G-SFPP-SR 57-0000075-01 XBR-000180 Ethernet SR SFP+ 200pcs

$7.99



NEW Sealed Original CISCO GLC-SX-MMD  SFP TRANSCEIVER MODULE GBIC *US Shipping* picture

NEW Sealed Original CISCO GLC-SX-MMD SFP TRANSCEIVER MODULE GBIC *US Shipping*

$14.00



New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Transceiver Module 1310nm 10km LC SMF picture

New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Transceiver Module 1310nm 10km LC SMF

$16.90