Results 1 to 2 of 2

Thread: On exit : dirty bit is always set

  1. #1
    Member registered user
    Join Date
    Dec 2006
    Posts
    49

    On exit : dirty bit is always set

    Earlier versions of KNOPPIX always automatically unmounted any mounted devices on "halt" (init 0) or "reboot" (init 6) if the user had forgotten to do so.
    Recently (since at least 7.4.2, maybe a lot earlier) this kind feature was removed; and then, in any future session, attempting to mount an external device, one might get the error message "device not properly unmounted". No problem, easily managed.
    But on 8.2.0 I find that the boot device is itself left "dirty". Bu this I mean:
    I operate KNOPPIX from a USB boot flash drive /dev/sda1. Every time I start up, if I try
    $ dosfsck -r /dev/sda1
    then I get
    0x41 : Dirty bit is set. Fs was not properly unmounted and some data may be corrupt.
    So, on exiting KNOPPIX, not even the boot device (let alone any others mounted during a session) is unmounted. This, surely, is an oversight.
    Can anything be done manually just before exit? I tried the obvious "umount /dev/sda1" and "umount /mnt-system" but got the same error message "device is in use".
    Any ideas? Thank you for your help!
    Fergus

  2. #2
    Senior Member
    Join Date
    Jan 2012
    Posts
    110
    Hi Fergus,

    I am a very very newbie!

    I suggest you to exit "PROPERLY ALL APPLICATIONS"

    opened ( included those you MIGTH have forgotten!!!!).

    before "exiting any SESSION".

    I haveencountered almost such a problem with some

    older versions.

    I used the "trick" completed, sometimes, with the "windows

    chkdsk program" (the corresponding of"fsck program"

    on the the "Fat Partition"

    Good luck !

    knp

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs picture

ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs

$179.99



ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID picture

ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID

$55.45



OWC Guardian Maximus Raid Enclosure SATA Hard Drive FireWire picture

OWC Guardian Maximus Raid Enclosure SATA Hard Drive FireWire

$36.99



RGB 4/5 Bay RAID USB 3.0 to SATA External Hard Drive Enclosure for 2.5/3.5'' HDD picture

RGB 4/5 Bay RAID USB 3.0 to SATA External Hard Drive Enclosure for 2.5/3.5'' HDD

$170.99



Inspur LSI YZCA-00424-101 Raid Card 12Gbps HBA Controller Low Profile 9300-8i IT picture

Inspur LSI YZCA-00424-101 Raid Card 12Gbps HBA Controller Low Profile 9300-8i IT

$15.98



LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault picture

LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault

$39.00



Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 04Y5H1 High Profile picture

Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 04Y5H1 High Profile

$13.99



Dell 7H4CN PERC H730P Raid Controller Mini Mono12GBPS 2GB NV Cache picture

Dell 7H4CN PERC H730P Raid Controller Mini Mono12GBPS 2GB NV Cache

$44.99



Yottamaster 5 Bay RAID Hard Drive Enclosure Type-C B For 2.5

Yottamaster 5 Bay RAID Hard Drive Enclosure Type-C B For 2.5" 3.5" SATA HDD SSDs

$140.99



ORICO 5 Bay Raid USB3.0 to SATA External Hard Drive Enclosure for 3.5'' HDD LOT picture

ORICO 5 Bay Raid USB3.0 to SATA External Hard Drive Enclosure for 3.5'' HDD LOT

$175.99