Results 1 to 2 of 2

Thread: On exit : dirty bit is always set

  1. #1
    Member registered user
    Join Date
    Dec 2006
    Posts
    49

    On exit : dirty bit is always set

    Earlier versions of KNOPPIX always automatically unmounted any mounted devices on "halt" (init 0) or "reboot" (init 6) if the user had forgotten to do so.
    Recently (since at least 7.4.2, maybe a lot earlier) this kind feature was removed; and then, in any future session, attempting to mount an external device, one might get the error message "device not properly unmounted". No problem, easily managed.
    But on 8.2.0 I find that the boot device is itself left "dirty". Bu this I mean:
    I operate KNOPPIX from a USB boot flash drive /dev/sda1. Every time I start up, if I try
    $ dosfsck -r /dev/sda1
    then I get
    0x41 : Dirty bit is set. Fs was not properly unmounted and some data may be corrupt.
    So, on exiting KNOPPIX, not even the boot device (let alone any others mounted during a session) is unmounted. This, surely, is an oversight.
    Can anything be done manually just before exit? I tried the obvious "umount /dev/sda1" and "umount /mnt-system" but got the same error message "device is in use".
    Any ideas? Thank you for your help!
    Fergus

  2. #2
    Senior Member
    Join Date
    Jan 2012
    Posts
    110
    Hi Fergus,

    I am a very very newbie!

    I suggest you to exit "PROPERLY ALL APPLICATIONS"

    opened ( included those you MIGTH have forgotten!!!!).

    before "exiting any SESSION".

    I haveencountered almost such a problem with some

    older versions.

    I used the "trick" completed, sometimes, with the "windows

    chkdsk program" (the corresponding of"fsck program"

    on the the "Fat Partition"

    Good luck !

    knp

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA picture

LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA

$229.99



HPE 843201-001 SMART ARRAY P840ar/2GB 12Gb/s FBWC SAS RAID CONTROLLER BOARD picture

HPE 843201-001 SMART ARRAY P840ar/2GB 12Gb/s FBWC SAS RAID CONTROLLER BOARD

$345.60



HPE 848147-001 SMART ARRAY P840ar/2GB 12Gb/s FBWC SAS RAID CONTROLLER BOARD picture

HPE 848147-001 SMART ARRAY P840ar/2GB 12Gb/s FBWC SAS RAID CONTROLLER BOARD

$323.55



HPE 843199-B21 SMART ARRAY P840ar/2GB 12Gb/s FBWC SAS RAID CONTROLLER BOARD picture

HPE 843199-B21 SMART ARRAY P840ar/2GB 12Gb/s FBWC SAS RAID CONTROLLER BOARD

$355.50



Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE picture

Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE

$15.98



LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License picture

LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License

$35.96



ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs picture

ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs

$86.99



LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault picture

LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault

$39.00



Yottamaster 5 Bay RAID Hard Drive Enclosure USB3.1 Type C 2.5

Yottamaster 5 Bay RAID Hard Drive Enclosure USB3.1 Type C 2.5"/3.5" SATA HDD SSD

$142.49



ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID picture

ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID

$58.99