Results 1 to 2 of 2

Thread: On exit : dirty bit is always set

  1. #1
    Member registered user
    Join Date
    Dec 2006
    Posts
    49

    On exit : dirty bit is always set

    Earlier versions of KNOPPIX always automatically unmounted any mounted devices on "halt" (init 0) or "reboot" (init 6) if the user had forgotten to do so.
    Recently (since at least 7.4.2, maybe a lot earlier) this kind feature was removed; and then, in any future session, attempting to mount an external device, one might get the error message "device not properly unmounted". No problem, easily managed.
    But on 8.2.0 I find that the boot device is itself left "dirty". Bu this I mean:
    I operate KNOPPIX from a USB boot flash drive /dev/sda1. Every time I start up, if I try
    $ dosfsck -r /dev/sda1
    then I get
    0x41 : Dirty bit is set. Fs was not properly unmounted and some data may be corrupt.
    So, on exiting KNOPPIX, not even the boot device (let alone any others mounted during a session) is unmounted. This, surely, is an oversight.
    Can anything be done manually just before exit? I tried the obvious "umount /dev/sda1" and "umount /mnt-system" but got the same error message "device is in use".
    Any ideas? Thank you for your help!
    Fergus

  2. #2
    Senior Member
    Join Date
    Jan 2012
    Posts
    110
    Hi Fergus,

    I am a very very newbie!

    I suggest you to exit "PROPERLY ALL APPLICATIONS"

    opened ( included those you MIGTH have forgotten!!!!).

    before "exiting any SESSION".

    I haveencountered almost such a problem with some

    older versions.

    I used the "trick" completed, sometimes, with the "windows

    chkdsk program" (the corresponding of"fsck program"

    on the the "Fat Partition"

    Good luck !

    knp

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Cisco Nexus 9300 48-Port 25GbE SFP 6x100GbE QSFP Switch P/N: N9K-C93180YC-EX picture

Cisco Nexus 9300 48-Port 25GbE SFP 6x100GbE QSFP Switch P/N: N9K-C93180YC-EX

$499.99



Cisco WS-C3850-12X48U-L 48 Port 10/100/1000 Modular Uplink Switch-Same Day Shipp picture

Cisco WS-C3850-12X48U-L 48 Port 10/100/1000 Modular Uplink Switch-Same Day Shipp

$198.99



Cisco Nexus N9K-C92160YC-X 48P 25GbE SFP28 6P QSFP+/QSFP28 PE Switch picture

Cisco Nexus N9K-C92160YC-X 48P 25GbE SFP28 6P QSFP+/QSFP28 PE Switch

$475.00



(NEW) Cisco C9120AXE-B Wireless Access Point (C9120 Antennas not included) picture

(NEW) Cisco C9120AXE-B Wireless Access Point (C9120 Antennas not included)

$225.00



C3850-NM-2-10G CISCO 2 x 10GE Network Module 73-12734-06 picture

C3850-NM-2-10G CISCO 2 x 10GE Network Module 73-12734-06

$24.99



New Sealed Cisco GLC-SX-MMD 1000BASE-SX Transceiver Module *US Shipping* picture

New Sealed Cisco GLC-SX-MMD 1000BASE-SX Transceiver Module *US Shipping*

$11.00



Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850 picture

Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850

$30.99



Cisco Nexus N9K-C9372TX 48P 10G Gigabit Ethernet 6x QSFP+ 40G Switch 2x650W PSU picture

Cisco Nexus N9K-C9372TX 48P 10G Gigabit Ethernet 6x QSFP+ 40G Switch 2x650W PSU

$199.99



Cisco WS-C3750X-48PF-S 48 Port PoE Gigabit Switch w/ C3KX-NM-10G & Dual 1100WAC picture

Cisco WS-C3750X-48PF-S 48 Port PoE Gigabit Switch w/ C3KX-NM-10G & Dual 1100WAC

$114.88



Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig UPOE Network Switch + NM-8X Module picture

Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig UPOE Network Switch + NM-8X Module

$549.97