Edit the file /etc/modules as root in a console and add the line aha1542 to the bottom and it should be loaded at boot.Originally Posted by skoske
Hi folks,
I have successfully installed knoppix on my old IBM 300PL. At the installation only two IDE disks and an IDE cdrom were installed in the machine. Now I have added an Adaptec 1542CF SCSI controller with a connected YAMAHA cd recorder.
My problem: the SCSI controller and the attached cdrecorder are not recognized by the system at startup. The Adaptec SCSI BIOS is not installed (BIOS NOT INSTALLED! NO INT 13h DEVICES!), but I think this is correct because the BIOS is only needed when there are HDs or other boot devices are connected. When I start the aha1542 kernel module manually after startup (insmod aha1542) all works fine. Also I tried to enter aha1542=0x334 at the LILO prompt but nothinh happened.
Do you have any idea how I could configure the system in a way that the SCSI controller and cdrecorder will be detected at startup?
Thanks, Sven
Edit the file /etc/modules as root in a console and add the line aha1542 to the bottom and it should be loaded at boot.Originally Posted by skoske
... it's working!!!!!
Thank you!
Dell X1018 X-Series Smart Managed Switches 16-Port Gigabit 2-Port SFP Switch
$42.00
Cisco Catalyst WS-C3650-24PS-L 24-Port Gigabit Ethernet Network Switch TESTED
$49.99
NETGEAR GS108 ProSafe (GS108-400NAS) 8 Port Standalone Gigabit Ethernet Switch
$44.99
TP-Link 24-Port Gigabit Ethernet Unmanaged Switch Desktop/Rackmount TL-SG1024D
$59.49
Dell PowerConnect 6224 Rackmount 24-Port Gigabit Managed Ethernet Network Switch
$31.99
NETGEAR GS305E 5-Port Gigabit Ethernet SOHO Plus Switch
$5.99
Cisco WS-C2960CX-8TC - 12 Ports Fully Managed Ethernet Switch
$48.00
NEW TP-Link TL-SG108PE 8-port Gigabit PoE+ Swith w/ 4-port PoE -RES LLC STORE-
$49.50
Cisco Small business SG300-28P Managed 28 Port Gigabit Ethernet Switch
$67.95
Cisco Nexus 9300 48-Port 25GbE SFP 6x100GbE QSFP Switch P/N: N9K-C93180YC-EX
$499.99