Hi, I'm in need of a bit of assistance.
I'm trying to get knoppix (06-06-2003 build) to load up the driver for my New Media BASICS SCSI card on my Toshiba notebook (Satellite 1800). In the boot up sequence it recognizes the card but can't find the driver module (sym53c500_cs.o) on the cd. So I've tracked down a version of it (it's an old card and old driver so I'm not sure how well it will work, but it's all I can find), copied it to a floppy (which also has my config files saved to it), booted with the expert cheat code, and when it asked to load modules from the floppy it found the one it needed, but when cardmanager starts up it says it can't find the driver module. I'm new to Knoppix so I'm not sure if I'm doing something wrong, or if there is a problem loading a driver from the same disk as the config disk. Any help would be appreciated.
Two little side questions, if I boot with the expert cheat code, will the floppyconfig code still work and is there a particular order they need to be in. And if I get the SCSI card to work, will I need to use the expert code all the time or will a config save to the floppy have the driver location (ie. the floppy) recorded?
Thanks in advance.
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2620V3 | NO RAM | P244BR | 2xHDD Tray
$179.00
SuperMicro SYS-F618R2-RTN+X10DRFR-N 16X E5-2680V4 RAM256Gb 4x1620W blade server
$2600.00
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell M630 PowerEdge Blade Server
$700.00
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG
$69.99
Dell PowerEdge M620 Blade Server
$39.99
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99