Boot like this:
boot: knoppix nofirewire
plus any other codes you may need.
Hi,
I use Knoppix on my Laptop and I am very pleased with it. But recently a co-worker wanted to run it on a similar Laptop and it hangs in the hardware detection. Is there a way to tell where it hangs? Booting in (almost) no hardware detection also hangs, as well as the expert mode. We also tried to run the Red Hat 9 Install on his PC, buut it also hangs at loading the ohci1394 driver. Is there a way to tell that Knoppix has the same problem? If the ohci1394 really is the problem, is there a way to prevent its loading?
Thanks,
Lothar
Boot like this:
boot: knoppix nofirewire
plus any other codes you may need.
DELL PowerEdge R730XD 24x 2.5" Server Dual 750W Dual Heatsink - BareBones TESTED
$269.99
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
DELL POWEREDGE T430 SERVER W/ DUAL XEON E5-2609 CPU & 16GB MEMORY
$329.00
CTO Dell PowerEdge R630 Server, 2x Xeon E5-2620V4, 64GB- 512GB RAM, 480GB SSDs
$246.67
Dell PowerEdge R620 Server 2x E5-2650 V2 = 16 Cores H710P 128GB RAM 2x 600GB SAS
$274.99
Dell PowerEdge R440 10-Bay Server | 2x Xeon Gold 6126 12Core CPU, 64GB PC4 RAM
$659.00
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$274.00
DELL PowerEdge R630 8SFF Server 2x E5-2690v4 2.6GHz =28 Cores 256GB H730 4xRJ45
$600.00