-
USB 2.0 Support?
I've just downloaded knoppix build 2003-01-01
It booted fine and detected all my USB 2.0 peripherals (harddrive, CD-R/RW, hub, pcmcia host controller) but they've come up only at USB 1.1 speeds.
Does anyone know how I can make it run at the full USB 2.0 speed?
The harddrive is so slow at 12 Mbps!
Thanks
-
Senior Member
registered user
Re: USB 2.0 Support?
' modprobe ehci-hcd '
From /usr/src/linux-2.4.20-xfs/Documentation/usb/ehci.txt
[[
The EHCI driver is used to talk to high speed USB 2.0 devices using
USB 2.0-capable host controller hardware. The USB 2.0 standard is
compatible with the USB 1.1 standard. It defines three transfer speeds:
- "High Speed" 480 Mbit/sec (60 MByte/sec)
- "Full Speed" 12 Mbit/sec (1.5 MByte/sec)
- "Low Speed" 1.5 Mbit/sec
USB 1.1 only addressed full speed and low speed. High speed devices
can be used on USB 1.1 systems, but they slow down to USB 1.1 speeds.
USB 1.1 devices may also be used on USB 2.0 systems. When plugged
into an EHCI controller, they are given to a USB 1.1 "companion"
controller, which is a OHCI or UHCI controller as normally used with
such devices. When USB 1.1 devices plug into USB 2.0 hubs, they
interact with the EHCI controller through a "Transaction Translator"
(TT) in the hub, which turns low or full speed transactions into
high speed "split transactions" that don't waste transfer bandwidth.
At this writing, this driver has been seen to work with implementations
of EHCI from (in alphabetical order): Intel, NEC, Philips, and VIA.
]]
Originally Posted by
Tom
I've just downloaded knoppix build 2003-01-01
It booted fine and detected all my USB 2.0 peripherals (harddrive, CD-R/RW, hub, pcmcia host controller) but they've come up only at USB 1.1 speeds.
Does anyone know how I can make it run at the full USB 2.0 speed?
The harddrive is so slow at 12 Mbps!
Thanks
Similar Threads
-
By alexjenx in forum Hardware & Booting
Replies: 1
Last Post: 05-27-2004, 01:08 AM
-
By langhaarrocker in forum Customising & Remastering
Replies: 2
Last Post: 05-22-2004, 07:45 PM
-
By dork in forum General Support
Replies: 0
Last Post: 05-05-2004, 06:12 PM
-
By baldyeti in forum The Lounge
Replies: 3
Last Post: 11-28-2003, 11:18 PM
-
By ranch137 in forum General Support
Replies: 2
Last Post: 04-16-2003, 06:08 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Watchguard XCS 570 Firewall SuperMicro 1U Server Intel 4GB VPN Router LINUX 🍁
$146.29
KRAMBU 8 GPU 4U Barebone Server
$1499.99
Red Hat Enterprise Linux 5 Server - New and Sealed
$16.99
1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports
$149.00
IBM CS821 20-Core 2.827GHz 128Gb 1.92Tb SSD 1U Linux Server - 8005-12N Power 8
$449.96
IBM E850 Power8 2x 12C 3.02GHz 512Gb 1.8Tb SAS 10GbE 16Gb Linux Server 8408-E8E
$674.96
PFSENSE 15" Depth Server Router Firewall Supermicro X11SSH-F E3-1240 V5 32GB RAM
$382.00
IBM Power8 S822L 20-Core 3.42GHz 256Gb 1.2Tb 40G Elastic Storage Server 5148-22L
$599.95
Dell PowerEdge R730xd Server 2.60Ghz 32-Core 64GB 800GB SSD Debian Linux
$836.80
IBM System X 3250 M5 Single Xeon Quad Core E3-1220 v3 @3.1GHz,8GB RAM,Linux SUSE
$159.00