-
USB 2.0 Support?
I've just downloaded knoppix build 2003-01-01
It booted fine and detected all my USB 2.0 peripherals (harddrive, CD-R/RW, hub, pcmcia host controller) but they've come up only at USB 1.1 speeds.
Does anyone know how I can make it run at the full USB 2.0 speed?
The harddrive is so slow at 12 Mbps!
Thanks
-
Senior Member
registered user
Re: USB 2.0 Support?
' modprobe ehci-hcd '
From /usr/src/linux-2.4.20-xfs/Documentation/usb/ehci.txt
[[
The EHCI driver is used to talk to high speed USB 2.0 devices using
USB 2.0-capable host controller hardware. The USB 2.0 standard is
compatible with the USB 1.1 standard. It defines three transfer speeds:
- "High Speed" 480 Mbit/sec (60 MByte/sec)
- "Full Speed" 12 Mbit/sec (1.5 MByte/sec)
- "Low Speed" 1.5 Mbit/sec
USB 1.1 only addressed full speed and low speed. High speed devices
can be used on USB 1.1 systems, but they slow down to USB 1.1 speeds.
USB 1.1 devices may also be used on USB 2.0 systems. When plugged
into an EHCI controller, they are given to a USB 1.1 "companion"
controller, which is a OHCI or UHCI controller as normally used with
such devices. When USB 1.1 devices plug into USB 2.0 hubs, they
interact with the EHCI controller through a "Transaction Translator"
(TT) in the hub, which turns low or full speed transactions into
high speed "split transactions" that don't waste transfer bandwidth.
At this writing, this driver has been seen to work with implementations
of EHCI from (in alphabetical order): Intel, NEC, Philips, and VIA.
]]
Originally Posted by
Tom
I've just downloaded knoppix build 2003-01-01
It booted fine and detected all my USB 2.0 peripherals (harddrive, CD-R/RW, hub, pcmcia host controller) but they've come up only at USB 1.1 speeds.
Does anyone know how I can make it run at the full USB 2.0 speed?
The harddrive is so slow at 12 Mbps!
Thanks
Similar Threads
-
By alexjenx in forum Hardware & Booting
Replies: 1
Last Post: 05-27-2004, 01:08 AM
-
By langhaarrocker in forum Customising & Remastering
Replies: 2
Last Post: 05-22-2004, 07:45 PM
-
By dork in forum General Support
Replies: 0
Last Post: 05-05-2004, 06:12 PM
-
By baldyeti in forum The Lounge
Replies: 3
Last Post: 11-28-2003, 11:18 PM
-
By ranch137 in forum General Support
Replies: 2
Last Post: 04-16-2003, 06:08 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell Intel X710-DA2 2x 10Gb SFP+ PCIe Adapter FH Y5M7N
$80.99
Team T-FORCE VULCAN Z 16GB (2 x 8GB) 288-Pin PC RAM DDR4 3200 (PC4 25600) XMP
$38.99
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
Corsair Vengeance LPX 32GB PC4-25600 (DDR4-3200) Memory NEVER USED LOOSE STICKS
$40.00
CORSAIR Vengeance RGB Pro 32GB (2 x 16GB) 288-Pin PC RAM DDR4 3600 (PC4 28800)
$79.95
Samsung 16GB (2x8GB) DDR4 2400MHz PC4-19200 Desktop RAM Memory M378A1K43CB2-CRC
$19.95
Crucial 16GB (2x 8GB) Kit DDR3L 1600MHz PC3-12800 UDIMM Desktop 240-Pin CL11 RAM
$21.33
HyperX FURY DDR3 8GB 16GB 32GB 1600 MHz PC3-12800 Desktop RAM Memory DIMM 240pin
$12.90
16GB 8GB 4GB DDR2 800MHz PC2-6400U 240Pin intel DIMM Desktop PC Memory SDRAM LOT
$79.99
Patriot Viper Steel DDR4 RAM 16GB (2X8GB) pvs416g440c9k
$69.99