This is just a shot in the dark but if you don't need WOL you might try unplugging that wire from your NIC. I have had some weird experiences w/ the FA311- it would casue my SlotA AMD to power on simply by inserting the card into its slot!
Hi. I'm a linux newb and I need some help with Knoppix. I just did a hdinstall on my computer and when installing I got the following error message:
Sending DHCP Broadcast from device eth0<6>eth0: Autonegotiation did not complete in 4000 usec.
etho0: Link up
eth0: remaining active for wake-on-lan
Operation failed.
Failed.
I've not yet tried to access the internet from within my hd install because 1) I got the exact same error message using Netcardconfig while using Knoppix from CD
2) My internet connection didn't work from CD.
Those two points make me assume that I'm not going to be able to access the internet from my hdd install. I will try tho, and post the results to this message.
I'm using an Athlon tbird 1.2ghz 512m RAM, 20 gig hdd. Windows xp on partition 1, linux ext2 on partition 2, linux swap on parition 3, and fat32 on partition 4. Toshiba PCX2200 cable modem, netgear FA311 nic. Everything else seems to work fine when I boot from CD.
Help?!?!
This is just a shot in the dark but if you don't need WOL you might try unplugging that wire from your NIC. I have had some weird experiences w/ the FA311- it would casue my SlotA AMD to power on simply by inserting the card into its slot!
the netgear FA311 nic is kind of hard to configure, try this as root:
modprobe natsemi
if it loads w/out giving an error, and you are using a dhcp server for your ip address then use this command:
pump
or use the knoppix netcard config wizzard
HTH
--rock
I don't know what happened, but I reinstalled knoppix on my pc. And now, when I boot from the HDD, i can get to the net. Don't know why it didn't do it before, but it works now. Who knew? No problems at all on the install. Thanks for all the help.
SUN Blade X6250 Server 8GB RAM DUAL PROCESSORS 594-4531-01
$109.99
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6132 112C 1TB
$2699.99
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG
$69.99
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
HP ProLiant BL460c Server Blade (2 x CPU) 24GB RAM/No Drives
$45.60
LARGE Lot of HP ProLiant SL230s Gen8 Server Intel Xeon E5-2650 2.6Ghz 128GB
$28999.99
Dell PowerEdge M620 Blade Server
$39.99
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99