-
lftp question
Hello folks,
I have problems using ftp (lftp) with knoppix 2003-06-06.
Login via ssh with the same login and password works fine.
After aktivating ftp-logging in /etc/inetd.conf:
...
root@knx2:/var/log# grep ftp /etc/inetd.conf
ftp stream tcp nowait root /usr/sbin/tcpd /usr/sbin/in.ftpd -d
...
following appears in /var/log/syslog:
...Jul 20 16:28:02 knx2 in.ftpd[1079]: connect from knx2
Jul 20 16:28:02 knx2 ftpd[1079]: <--- 220
Jul 20 16:28:02 knx2 ftpd[1079]: knx2 FTP server (Version 6.4/OpenBSD/Linux-ftpd-0.17) ready.
Jul 20 16:28:02 knx2 ftpd[1079]: command: AUTH TLS
Jul 20 16:28:02 knx2 ftpd[1079]: <--- 500
Jul 20 16:28:02 knx2 ftpd[1079]: 'AUTH TLS': command not understood.
Jul 20 16:28:02 knx2 ftpd[1079]: command: USER paccess9
Jul 20 16:28:02 knx2 ftpd[1079]: <--- 331
Jul 20 16:28:02 knx2 ftpd[1079]: Password required for paccess9.
Jul 20 16:28:02 knx2 ftpd[1079]: command: PASS ???
Jul 20 16:28:05 knx2 ftpd[1079]: <--- 530
Jul 20 16:28:05 knx2 ftpd[1079]: Login incorrect.
Jul 20 16:28:05 knx2 ftpd[1079]: command: PWD
Jul 20 16:28:05 knx2 ftpd[1079]: <--- 530
Jul 20 16:28:05 knx2 ftpd[1079]: Please login with USER and PASS.
Jul 20 16:28:05 knx2 ftpd[1079]: command: QUIT
Jul 20 16:28:05 knx2 ftpd[1079]: <--- 221
Jul 20 16:28:05 knx2 ftpd[1079]: Goodbye.
...
during my ftp-login-session:
paccess9@knx2:~$ ftp knx2
lftp knx2:~> user paccess9 0odrocw1
lftp paccess9@knx2:~> ls
ls: Login fehlgeschlagen: 530 Login incorrect.
lftp paccess9@knx2:~>
tnkx in advance for all your help!
-
Senior Member
registered user
Re: lftp question
--You should try ' ftp -u USERID SITE '.
Originally Posted by
kx14386
Hello folks,
I have problems using ftp (lftp) with knoppix 2003-06-06.
Login via ssh with the same login and password works fine.
After aktivating ftp-logging in /etc/inetd.conf:
...
root@knx2:/var/log# grep ftp /etc/inetd.conf
ftp stream tcp nowait root /usr/sbin/tcpd /usr/sbin/in.ftpd -d
...
following appears in /var/log/syslog:
...Jul 20 16:28:02 knx2 in.ftpd[1079]: connect from knx2
Jul 20 16:28:02 knx2 ftpd[1079]: <--- 220
Jul 20 16:28:02 knx2 ftpd[1079]: knx2 FTP server (Version 6.4/OpenBSD/Linux-ftpd-0.17) ready.
Jul 20 16:28:02 knx2 ftpd[1079]: command: AUTH TLS
Jul 20 16:28:02 knx2 ftpd[1079]: <--- 500
Jul 20 16:28:02 knx2 ftpd[1079]: 'AUTH TLS': command not understood.
Jul 20 16:28:02 knx2 ftpd[1079]: command: USER paccess9
Jul 20 16:28:02 knx2 ftpd[1079]: <--- 331
Jul 20 16:28:02 knx2 ftpd[1079]: Password required for paccess9.
Jul 20 16:28:02 knx2 ftpd[1079]: command: PASS ???
Jul 20 16:28:05 knx2 ftpd[1079]: <--- 530
Jul 20 16:28:05 knx2 ftpd[1079]: Login incorrect.
Jul 20 16:28:05 knx2 ftpd[1079]: command: PWD
Jul 20 16:28:05 knx2 ftpd[1079]: <--- 530
Jul 20 16:28:05 knx2 ftpd[1079]: Please login with USER and PASS.
Jul 20 16:28:05 knx2 ftpd[1079]: command: QUIT
Jul 20 16:28:05 knx2 ftpd[1079]: <--- 221
Jul 20 16:28:05 knx2 ftpd[1079]: Goodbye.
...
during my ftp-login-session:
paccess9@knx2:~$ ftp knx2
lftp knx2:~> user paccess9 0odrocw1
lftp paccess9@knx2:~> ls
ls: Login fehlgeschlagen: 530 Login incorrect.
lftp paccess9@knx2:~>
tnkx in advance for all your help!
-
Hi Dave,
thanks a lot for your reply.
It's a pitty but it doesn't work.
ftp-session:
root@knx2:~# ftp -u paccess9 knx2
Passwort:
lftp paccess9@knx2:~> ls
ls: Login fehlgeschlagen: 530 Login incorrect.
lftp paccess9@knx2:~>
inetd -d:
.root@knx2:~# /usr/sbin/inetd -d
ADD : ftp proto=tcp, wait.max=0.40, user.group=root.(null) builtin=0 server=/usr/sbin/tcpd
someone wants ftp
accept, ctrl 5
631 execl /usr/sbin/tcpd
631 reaped, status 0
syslog:
Jul 21 20:28:52 knx2 in.ftpd[631]: connect from knx2
Jul 21 20:28:52 knx2 ftpd[631]: <--- 220
Jul 21 20:28:52 knx2 ftpd[631]: knx2 FTP server (Version 6.4/OpenBSD/Linux-ftpd-0.17) ready.
Jul 21 20:28:52 knx2 ftpd[631]: command: AUTH TLS
Jul 21 20:28:52 knx2 ftpd[631]: <--- 500
Jul 21 20:28:52 knx2 ftpd[631]: 'AUTH TLS': command not understood.
Jul 21 20:28:53 knx2 ftpd[631]: command: USER paccess9
Jul 21 20:28:53 knx2 ftpd[631]: <--- 331
Jul 21 20:28:53 knx2 ftpd[631]: Password required for paccess9.
Jul 21 20:28:53 knx2 ftpd[631]: command: PASS ???
Jul 21 20:28:55 knx2 ftpd[631]: <--- 530
Jul 21 20:28:55 knx2 ftpd[631]: Login incorrect.
Jul 21 20:28:55 knx2 ftpd[631]: command: PWD
Jul 21 20:28:55 knx2 ftpd[631]: <--- 530
Jul 21 20:28:55 knx2 ftpd[631]: Please login with USER and PASS.
Jul 21 20:28:55 knx2 ftpd[631]: command: QUIT
Jul 21 20:28:55 knx2 ftpd[631]: <--- 221
Jul 21 20:28:55 knx2 ftpd[631]: Goodbye.
Jul 21 20:30:01 knx2 /USR/SBIN/CRON[633]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck)
###############
ssh using this account and this password is working:
root@knx2:~# ssh paccess9@knx2
paccess9@knx2's password:
Warning: No xauth data; using fake authentication data for X11 forwarding.
Welcome to Knoppix (Kernel 2.4.20-xfs)
paccess9@knx2:~$ uname -a
Linux knx2 2.4.20-xfs #1 SMP Mit Mär 26 15:37:36 CET 2003 i586 GNU/Linux
paccess9@knx2:~$
Any other Ideas, Configurationchanges, debugging/tracing or some other stuff ???
-
Senior Member
registered user
1. Make sure ' paccess9 ' is NOT in the file /etc/ftpusers
2. Make sure the box you are logging in from is in /etc/hosts (on both machines) and covered in /etc/hosts.allow
3. If /etc/hosts.deny still contains ALL,PARANOID on knx2, comment it out with a '#' at the 1st char of the line. You may have to do ' /etc/init.d/inetd restart ' afterward.
4. Try switching to Proftpd (apt-get install proftpd) if nothing above works.
--See if ' nmap knx2 ' turns up port 21 (ftp.)
Originally Posted by
kx14386
Hi Dave,
thanks a lot for your reply.
It's a pitty but it doesn't work.
ftp-session:
root@knx2:~# ftp -u paccess9 knx2
Passwort:
lftp paccess9@knx2:~> ls
ls: Login fehlgeschlagen: 530 Login incorrect.
lftp paccess9@knx2:~>
inetd -d:
.root@knx2:~# /usr/sbin/inetd -d
ADD : ftp proto=tcp, wait.max=0.40, user.group=root.(null) builtin=0 server=/usr/sbin/tcpd
someone wants ftp
accept, ctrl 5
631 execl /usr/sbin/tcpd
631 reaped, status 0
syslog:
Jul 21 20:28:52 knx2 in.ftpd[631]: connect from knx2
Jul 21 20:28:52 knx2 ftpd[631]: <--- 220
Jul 21 20:28:52 knx2 ftpd[631]: knx2 FTP server (Version 6.4/OpenBSD/Linux-ftpd-0.17) ready.
Jul 21 20:28:52 knx2 ftpd[631]: command: AUTH TLS
Jul 21 20:28:52 knx2 ftpd[631]: <--- 500
Jul 21 20:28:52 knx2 ftpd[631]: 'AUTH TLS': command not understood.
Jul 21 20:28:53 knx2 ftpd[631]: command: USER paccess9
Jul 21 20:28:53 knx2 ftpd[631]: <--- 331
Jul 21 20:28:53 knx2 ftpd[631]: Password required for paccess9.
Jul 21 20:28:53 knx2 ftpd[631]: command: PASS ???
Jul 21 20:28:55 knx2 ftpd[631]: <--- 530
Jul 21 20:28:55 knx2 ftpd[631]: Login incorrect.
Jul 21 20:28:55 knx2 ftpd[631]: command: PWD
Jul 21 20:28:55 knx2 ftpd[631]: <--- 530
Jul 21 20:28:55 knx2 ftpd[631]: Please login with USER and PASS.
Jul 21 20:28:55 knx2 ftpd[631]: command: QUIT
Jul 21 20:28:55 knx2 ftpd[631]: <--- 221
Jul 21 20:28:55 knx2 ftpd[631]: Goodbye.
Jul 21 20:30:01 knx2 /USR/SBIN/CRON[633]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck)
###############
ssh using this account and this password is working:
root@knx2:~# ssh paccess9@knx2
paccess9@knx2's password:
Warning: No xauth data; using fake authentication data for X11 forwarding.
Welcome to Knoppix (Kernel 2.4.20-xfs)
paccess9@knx2:~$ uname -a
Linux knx2 2.4.20-xfs #1 SMP Mit Mär 26 15:37:36 CET 2003 i586 GNU/Linux
paccess9@knx2:~$
Any other Ideas, Configurationchanges, debugging/tracing or some other stuff ???
Similar Threads
-
Replies: 5
Last Post: 07-09-2005, 04:40 PM
-
By mark1221 in forum Hdd Install / Debian / Apt
Replies: 2
Last Post: 11-01-2003, 10:32 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Juniper Networks EX3300-48P 48-Port PoE+ 4x SFP+ Network Switch w/ Power Cord
$43.95
lot of 10 Juniper EX-SFP-10GE-SR Compatible 10GBASE-SR SFP+ 850nm 300m DOM -J499
$220.00
JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER
$210.00
Juniper Networks EX2200-C-12P-2G 12 Port Gigabit PoE 2 T/SFP 1G Network Switch
$129.00
Juniper EX3300-48P, 48 Port PoE+ Gigabit Network Switch w/ Power cord
$54.99
EX2300-24P Juniper 24-port 10/100/1000BASE-T PoE+ 4 x 1/10GbE SFP/SFP+ UNCLAIMED
$450.00
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$41.43
Juniper EX3400-48P 48-Ports PoE+ 4x SFP+ and 2x QSFP+ Managed Switch Tested
$205.00
Juniper QFX5100-48T-AFI 48 100M/1G/10G Base-T 6 QSFP AFI
$485.00
JUNIPER EX4550-32F-AFO 32-PORT ETHERNET SWITCH 2x POWER SUPPLY - TESTED
$299.99