boot: knoppix testcd
Was able to buy the Linuxtag 2003 DVD from Lehmanns- Berlin. At first sight : nice piece of work!
However was not able to use the DVD just as a Knoppic CD. The DVD boots and everything is normal till the opening screen (in KDE) with ao all the info about the DVD. After a few seconds the screen freezes : keyboard and mouse do't react. The only thing to do is to reset or to shut down. Same problem under Fluxbox : after a few seconds (trying to load Kshisen) I had to shutdown.
Should I blame the DVD-disk or my DVD/CDROM drive?
Thanks beforehand for any help.
Regards,
Georges.
boot: knoppix testcd
Thanks for good advice.
After 'Knoppix testcd" got :
"Reading files and checking against KNOPPIX?md5sums, this may take a while"
Waited for over three quarters of an hour. Still checking ... Then I shut the computer down. Is this normal on a Intel P4 2.40 Mhz with 512 MB Ram machine?
However does this prove anything?
Thanks for any comment.
Regards,
Georges.
Not good- it should have returned after 10, maybe 15 minutes on the outside with "everything looks ok" Looks like maybe your cd's no good. The only other thing I can think of is booting it on another machine. Probably not what you wanted to hear eh?
Thanks for kind reaction.
My problem is half solved ... Discovered by accident that everything goes fine if I remove an USb 2.0 memory stick. I can boot and use the DVD as a CD then. Same problem with Knoppix 2003-07-24.
With Knoppic 2003-06-06 everything went fine with that USb 2.0 memory stick. The trouble is now that I lose my /home-dir and my configuration when using the DVD or the Knoppix 2003-07-24.
Any idea?
Thank you.
Best Regards,
Georges.
Could you perhaps consider putting up an image of the DVD somewhere online? If you would I could probably make the effort to start up a bittorrent server--we'd need some more seeds (err?) as I only have a 256k upstream (i.e. ~40hr download for the DVD for one person) but it'd be a start.
Or maybe someone with more bandwidth would help and host it.
I would be willing to dedicate some bandwidth to the project. If someone who has the image, contact me at
dshurett (at) alphaomegahosting (dot) com
New Cisco SFP-25G-SR-S 25G SFP28 25GBASE-SR 850nm 300m LC MMF Transceiver Module
$51.30
NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*
$18.00
New Precision DWDM SFP+ 10G 80km Tunable Transceiver 50GHz C-Temp DWDM-SFP10G-C
$90.00
New HP HPE Aruba J4858D 1G SFP LC SX 850nm 500m MMF XCVR Transceiver Module
$28.49
GENUINE Cisco SFP-10G-SR V03 SFP+ GBIC Transceiver Module 10-2415-03
$6.80
🔥🔥🔥 CISCO SFP-10G-SR V03 10-2415-03 850nm 10GBASE-SR SFP+ Multi Module 🔥🔥🔥
$6.80
HP 10Gb SR SFP+ 10GBASE-SR 455885-001 10Gigabit Ethernet Transceiver 456096-001
$6.99
For Cisco SFP-10G-T, Ubiquiti UF-RJ45-10G Transceiver, SFP+ to RJ45 10GBase-T
$45.99
Dell X1018 X-Series Smart Managed Switches 16-Port Gigabit 2-Port SFP Switch
$42.00
New Cisco GLC-TE 1G SFP Copper RJ45 100m 1000BASE-T Transceiver Module
$22.32