boot: knoppix testcd
Was able to buy the Linuxtag 2003 DVD from Lehmanns- Berlin. At first sight : nice piece of work!
However was not able to use the DVD just as a Knoppic CD. The DVD boots and everything is normal till the opening screen (in KDE) with ao all the info about the DVD. After a few seconds the screen freezes : keyboard and mouse do't react. The only thing to do is to reset or to shut down. Same problem under Fluxbox : after a few seconds (trying to load Kshisen) I had to shutdown.
Should I blame the DVD-disk or my DVD/CDROM drive?
Thanks beforehand for any help.
Regards,
Georges.
boot: knoppix testcd
Thanks for good advice.
After 'Knoppix testcd" got :
"Reading files and checking against KNOPPIX?md5sums, this may take a while"
Waited for over three quarters of an hour. Still checking ... Then I shut the computer down. Is this normal on a Intel P4 2.40 Mhz with 512 MB Ram machine?
However does this prove anything?
Thanks for any comment.
Regards,
Georges.
Not good- it should have returned after 10, maybe 15 minutes on the outside with "everything looks ok" Looks like maybe your cd's no good. The only other thing I can think of is booting it on another machine. Probably not what you wanted to hear eh?
Thanks for kind reaction.
My problem is half solved ... Discovered by accident that everything goes fine if I remove an USb 2.0 memory stick. I can boot and use the DVD as a CD then. Same problem with Knoppix 2003-07-24.
With Knoppic 2003-06-06 everything went fine with that USb 2.0 memory stick. The trouble is now that I lose my /home-dir and my configuration when using the DVD or the Knoppix 2003-07-24.
Any idea?
Thank you.
Best Regards,
Georges.
Could you perhaps consider putting up an image of the DVD somewhere online? If you would I could probably make the effort to start up a bittorrent server--we'd need some more seeds (err?) as I only have a 256k upstream (i.e. ~40hr download for the DVD for one person) but it'd be a start.
Or maybe someone with more bandwidth would help and host it.
I would be willing to dedicate some bandwidth to the project. If someone who has the image, contact me at
dshurett (at) alphaomegahosting (dot) com
Supermicro 2U 6028R-E1CR24N 24x LFF- Wholesale Build Your Own Storage Server
$304.99
Supermicro 1U 6018U-TR4T+ w/ X10DRU-i+ - Wholesale Custom Build Your Server
$199.99
2U 12 Bay Supermicro 6028U-TR4T+ w/ X10DRU-i+ Wholesale Custom Build Your Server
$289.99
1U Server Dual Low Power Xeon E5-2640 V4 90W 20 Cores DDR4 ECC RAM 4x 10GB-T
$95.20
HPE ProLiant MicroServer Gen-8 Intel Xeon E3-1220L@2.30GHz 8GB RAM 4x 1TB HDD
$249.99
HPE ProLiant MicroServer Gen11 Ultra Micro Tower Server - 1 Xeon E-2414 2.60 GHz
$872.46
HP ProLiant MicroServer N54L HSTNS-5151 AMD TURION II 8 GB RAM - NO HDD - Tested
$125.00
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel
$799.00
ArcServe UDP 8200 SuperMicro X10SRW-F 32GB RAM Intel Xeon E5-2620v4 No Drives#73
$229.99
1U Open Source Router Firewall X10SLH-N6-ST031 E3-1270 V3 6x 10GB Ethernet 16GB
$360.00