boot: knoppix testcd
Was able to buy the Linuxtag 2003 DVD from Lehmanns- Berlin. At first sight : nice piece of work!
However was not able to use the DVD just as a Knoppic CD. The DVD boots and everything is normal till the opening screen (in KDE) with ao all the info about the DVD. After a few seconds the screen freezes : keyboard and mouse do't react. The only thing to do is to reset or to shut down. Same problem under Fluxbox : after a few seconds (trying to load Kshisen) I had to shutdown.
Should I blame the DVD-disk or my DVD/CDROM drive?
Thanks beforehand for any help.
Regards,
Georges.
boot: knoppix testcd
Thanks for good advice.
After 'Knoppix testcd" got :
"Reading files and checking against KNOPPIX?md5sums, this may take a while"
Waited for over three quarters of an hour. Still checking ... Then I shut the computer down. Is this normal on a Intel P4 2.40 Mhz with 512 MB Ram machine?
However does this prove anything?
Thanks for any comment.
Regards,
Georges.
Not good- it should have returned after 10, maybe 15 minutes on the outside with "everything looks ok" Looks like maybe your cd's no good. The only other thing I can think of is booting it on another machine. Probably not what you wanted to hear eh?
Thanks for kind reaction.
My problem is half solved ... Discovered by accident that everything goes fine if I remove an USb 2.0 memory stick. I can boot and use the DVD as a CD then. Same problem with Knoppix 2003-07-24.
With Knoppic 2003-06-06 everything went fine with that USb 2.0 memory stick. The trouble is now that I lose my /home-dir and my configuration when using the DVD or the Knoppix 2003-07-24.
Any idea?
Thank you.
Best Regards,
Georges.
Could you perhaps consider putting up an image of the DVD somewhere online? If you would I could probably make the effort to start up a bittorrent server--we'd need some more seeds (err?) as I only have a 256k upstream (i.e. ~40hr download for the DVD for one person) but it'd be a start.
Or maybe someone with more bandwidth would help and host it.
I would be willing to dedicate some bandwidth to the project. If someone who has the image, contact me at
dshurett (at) alphaomegahosting (dot) com
HPE ProLiant BL460c Gen8 735151-B21 E5-v2 Blade Server LOADED w 512 GIGS MEMORY
$280.00
Dell PowerEdge FX2S FC830 Blade Server Chassis Enclosure 2*2000W PSU NO BLADES
$209.99
DELL PowerEdge VRTX Blade Server Chassis SEE NOTES
$610.00
CISCO UCSB-B200-M3 UCS B200 M3 BLADE SERVER 2x Xeon E5-2650 2GHz 256GB RAM
$135.20
Dell PowerEdge FC830 blade server with 4x processors E5-4669v3 no memory
$189.00
ZimaBoard 432 Single Board Server / SATA Y adapter / DisplayPort to HMDI adapter
$90.00
Dell PowerEdge M520 Blade Server, 1x Intel Xeon E5-2420V2, NO RAM
$17.50
DELL PowerEdge M910 Blade Server TWO E7-2870 2.4GHZ 256GB Memory NO HD
$210.00
Cisco B200 M4 Two E5-2660V3 64GB-16 Blade Server 2x SFF VIC1240 UCS-MR-1X162RU
$62.44
Dell PowerEdge MX740C Blade Server CTO Chassis H730P
$299.00