Results 1 to 7 of 7

Thread: Subject : Konferenz DVD 2003

  1. #1
    Junior Member registered user
    Join Date
    Jul 2003
    Location
    Belgium
    Posts
    16

    Subject : Konferenz DVD 2003

    Was able to buy the Linuxtag 2003 DVD from Lehmanns- Berlin. At first sight : nice piece of work!

    However was not able to use the DVD just as a Knoppic CD. The DVD boots and everything is normal till the opening screen (in KDE) with ao all the info about the DVD. After a few seconds the screen freezes : keyboard and mouse do't react. The only thing to do is to reset or to shut down. Same problem under Fluxbox : after a few seconds (trying to load Kshisen) I had to shutdown.

    Should I blame the DVD-disk or my DVD/CDROM drive?

    Thanks beforehand for any help.

    Regards,

    Georges.

  2. #2
    Senior Member registered user
    Join Date
    Mar 2003
    Location
    colorado springs, colorado
    Posts
    1,933
    boot: knoppix testcd

  3. #3
    Junior Member registered user
    Join Date
    Jul 2003
    Location
    Belgium
    Posts
    16

    Knoppix 3.2 DVD

    Thanks for good advice.

    After 'Knoppix testcd" got :
    "Reading files and checking against KNOPPIX?md5sums, this may take a while"

    Waited for over three quarters of an hour. Still checking ... Then I shut the computer down. Is this normal on a Intel P4 2.40 Mhz with 512 MB Ram machine?

    However does this prove anything?

    Thanks for any comment.

    Regards,

    Georges.

  4. #4
    Senior Member registered user
    Join Date
    Mar 2003
    Location
    colorado springs, colorado
    Posts
    1,933
    Not good- it should have returned after 10, maybe 15 minutes on the outside with "everything looks ok" Looks like maybe your cd's no good. The only other thing I can think of is booting it on another machine. Probably not what you wanted to hear eh?

  5. #5
    Junior Member registered user
    Join Date
    Jul 2003
    Location
    Belgium
    Posts
    16
    Thanks for kind reaction.

    My problem is half solved ... Discovered by accident that everything goes fine if I remove an USb 2.0 memory stick. I can boot and use the DVD as a CD then. Same problem with Knoppix 2003-07-24.

    With Knoppic 2003-06-06 everything went fine with that USb 2.0 memory stick. The trouble is now that I lose my /home-dir and my configuration when using the DVD or the Knoppix 2003-07-24.

    Any idea?

    Thank you.

    Best Regards,

    Georges.

  6. #6
    Junior Member registered user
    Join Date
    Dec 2002
    Posts
    19
    Could you perhaps consider putting up an image of the DVD somewhere online? If you would I could probably make the effort to start up a bittorrent server--we'd need some more seeds (err?) as I only have a 256k upstream (i.e. ~40hr download for the DVD for one person) but it'd be a start.

    Or maybe someone with more bandwidth would help and host it.

  7. #7
    I would be willing to dedicate some bandwidth to the project. If someone who has the image, contact me at

    dshurett (at) alphaomegahosting (dot) com

Similar Threads

  1. ON POSTING: FORUMS and SUBJECT LINES
    By Harry Kuhman in forum General Support
    Replies: 11
    Last Post: 02-03-2012, 05:28 PM
  2. Subject line in reply form
    By GaTk in forum Hardware & Booting
    Replies: 0
    Last Post: 10-27-2004, 01:31 PM
  3. Subject/titles?
    By sn0wflake in forum Ideas
    Replies: 0
    Last Post: 12-01-2003, 04:14 PM
  4. Replies: 5
    Last Post: 09-07-2003, 10:47 AM
  5. kernel won't boot on 5/20/2003 or 6/6/2003
    By jedovaty in forum Hardware & Booting
    Replies: 2
    Last Post: 06-12-2003, 06:36 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


HP PROLIANT MICROSERVER MICRO SERVER HSTNS-5151 T4 Used. picture

HP PROLIANT MICROSERVER MICRO SERVER HSTNS-5151 T4 Used.

$45.00



HP ProLiant Xeon E3-1220L V2 16 GB RAM 2.30 GHz MicroServer Gen8 NO DRIVES picture

HP ProLiant Xeon E3-1220L V2 16 GB RAM 2.30 GHz MicroServer Gen8 NO DRIVES

$174.99



HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ* picture

HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ*

$94.99



Supermicro Server Tower Xeon BOOTS E5-2620 v4 2.10GHz 64GB RAM NO HDD NO OS picture

Supermicro Server Tower Xeon BOOTS E5-2620 v4 2.10GHz 64GB RAM NO HDD NO OS

$199.99



SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount picture

SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount

$202.49



HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon picture

HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon

$846.19



SUPERMICRO CSE-512 AMD Opteron Processor 6128, 32GB DDR3 RAM NO HDD picture

SUPERMICRO CSE-512 AMD Opteron Processor 6128, 32GB DDR3 RAM NO HDD

$90.00



Supermicro 5018A-FTN4 Rack Server - Black picture

Supermicro 5018A-FTN4 Rack Server - Black

$125.00



2U 12 Bay SAS3 SuperMicro Server 6028U-TR4T+ W/ X10DRU-i+ Barebone 12 Caddy RAIL picture

2U 12 Bay SAS3 SuperMicro Server 6028U-TR4T+ W/ X10DRU-i+ Barebone 12 Caddy RAIL

$299.00



1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE picture

1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE

$297.00