-
HDD Install
I had tried Knoppix loaded from disk 3 times with out any problems on my W98 box and I liked it. I wanted to do a hard install on its own drive 2.95 and maintain W98 on another to do dual boot. I decided to erase everything on the extra drive, but could not get rid of the trash basket from W98.
I was going to follow pnti's instructions, but now I cannot load the os from disk. After the Welcome to Knoppix 3.2 screen displays, the program begins to auto load but stops after about 10 lines after the lines :
USB found, managed by hotplug
enabling hotplug manager
autoconfiguring device (followed by green bar) h
Then the cursor stops at the beginning of next line and just blinks.
I appreciate any ideas, (BTW I am really new to linux). Thanks
-
HDD Install
javascript:emoticon ('')Sorry for my previous post, I went back to the Knoppix 3.2 screen and selected "failsafe" as a boot, this eliminated any problems with the hangup of the install; however it presents other challenges to be overcome by my lack of knowlege.
Sorry for previous post.
-
Senior Member
registered user
Re: HDD Install
As you can see I split your posts from their previous location. It is advisable to create your own topic in a forum so that it has better visibility.
Originally Posted by
sonic20
I had tried Knoppix loaded from disk 3 times with out any problems on my W98 box and I liked it. I wanted to do a hard install on its own drive 2.95 and maintain W98 on another to do dual boot. I decided to erase everything on the extra drive, but could not get rid of the trash basket from W98.
I was going to follow pnti's instructions, but now I cannot load the os from disk. After the Welcome to Knoppix 3.2 screen displays, the program begins to auto load but stops after about 10 lines after the lines :
USB found, managed by hotplug
enabling hotplug manager
autoconfiguring device (followed by green bar) h
Then the cursor stops at the beginning of next line and just blinks.
I appreciate any ideas, (BTW I am really new to linux). Thanks
I am unsure of how you are trying to boot knoppix, whether from cdrom or booting the .iso from your hard drive. Either way, try this:
boot: knoppix nousb
I don't know if you have any USB devices you wish to use but that usually will get you by the error you're getting. Post some hardware details and the output of lspci -v.
-
Junior Member
registered user
I've got the same problem!
And i tried with these;
Code:
knoppix noagp noddc noapm noapic nodma nocmcia nocsi nousb nosmp
But it just didn't work.. Now im trying failsafe..
EDIT: but this isn't a hddinstall, im just trying to run it..
Similar Threads
-
By phoenixzero in forum General Support
Replies: 1
Last Post: 09-24-2004, 06:14 AM
-
By fishjg in forum General Support
Replies: 3
Last Post: 09-04-2004, 09:10 PM
-
By Loper in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 07-11-2003, 02:38 AM
-
By toeknee in forum General Support
Replies: 9
Last Post: 04-14-2003, 04:03 PM
-
By _CaLeB_ in forum Hardware & Booting
Replies: 5
Last Post: 03-31-2003, 06:20 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Fanxiang SSD 4TB 2TB 1TB PS5 SSD M.2 NVME SSD 7300MBS PCIe 4.0 Solid State Drive
$259.99
Fanxiang 4TB 2TB 1TB SSD 550MB/s 2.5'' SATA III Internal Solid State Drive lot
$188.99
New 8TB 870 EVO Internal Solid State Drive Hard Disk SSD 2.5 Inch
$149.45
Netac 1TB 2TB 512GB Internal SSD 2.5'' SATA III 6Gb/s Solid State Drive lot
$119.99
Patriot P210 128GB 256GB 512GB 1TB 2TB 2.5" SATA 3 6GB/s Internal SSD PC/MAC Lot
$15.50
Patriot P300 128G 256GB 512GB 1TB 2TB M.2 2280 PCIe Gen3x4 NVMe Internal SSD Lot
$16.99
4tb Ssd 870evo Internal Solid State Drive Hard Disk 2.5 Inch Sata SSD For Laptop
$47.79
SSD 512GB 1/2/4TB 870 EVO SATA III SSD 2.5'' Solid State Drive Upgrade PC Laptop
$39.99
Fanxiang SSD 1TB 2TB 4TB Sata SSD Lot 2.5 512GB 256GB 6Gb/s Solid State Drive
$189.04
Fanxiang M.2 SATA SSD 2TB 1TB 512GB 256GB SSD Internal M2 Solid State Drive Lot
$109.99