Results 1 to 5 of 5

Thread: hardware autoconfig

  1. #1
    Junior Member
    Join Date
    Jul 2003
    Posts
    3

    hardware autoconfig

    When I used Knoppix I found it to be the best Linux distro since it reckognized all of my laptop hardware like my external hard drive connected via PC card firewire. Also I like the standard configuration of KDE a lot.

    This convinced me of installing Knoppix to HD. But I was really surprised to see none of the hardware auto configuration working after hdinstall.

    Is it possible to include knoppix-autoconfig somewhere in the boot process so that the HD installation gets configured exactly the same way as the Knoppix CD?

    I have searched here on this website and I have also googled a bit. I am sorry if I am missing something. Any hint to RTFM would be just fine.

    I am just surprised that this topic doesn't seem to be that important or why isn't it covered in the docs? To me, the auto configuration is the most important reason to switch over to Knoppix and I would guess that this is just the same for many users who either don't have the time or the Linux experience to figure out all that stuff on their own. And I am also pretty sure that you wouldn't want to run Knoppix from CD all the time, would you?

  2. #2
    Junior Member
    Join Date
    Jul 2003
    Posts
    3
    I should also mention that running knoppix-autoconfig from SysV editor as mentioned in another thread didn't work for me.

    Also, I tried to include the script in one of the run levels in SysV editor but also to no avail. It seems that all modules are being loaded earlier and autoconfig get confused about that.

  3. #3
    Junior Member
    Join Date
    Aug 2003
    Posts
    2

    Re: hardware autoconfig

    Quote Originally Posted by droy
    When I used Knoppix I found it to be the best Linux distro since it reckognized all of my laptop hardware like my external hard drive connected via PC card firewire. Also I like the standard configuration of KDE a lot.

    This convinced me of installing Knoppix to HD. But I was really surprised to see none of the hardware auto configuration working after hdinstall.

    Is it possible to include knoppix-autoconfig somewhere in the boot process so that the HD installation gets configured exactly the same way as the Knoppix CD?

    I have searched here on this website and I have also googled a bit. I am sorry if I am missing something. Any hint to RTFM would be just fine.

    I am just surprised that this topic doesn't seem to be that important or why isn't it covered in the docs? To me, the auto configuration is the most important reason to switch over to Knoppix and I would guess that this is just the same for many users who either don't have the time or the Linux experience to figure out all that stuff on their own. And I am also pretty sure that you wouldn't want to run Knoppix from CD all the time, would you?
    I'm disappointed that no one has answered your question, which I think is an incredibly important one. Is there no solution to this??

  4. #4
    Senior Member registered user
    Join Date
    Mar 2003
    Posts
    298
    I can think of a 'poormans install', you basicaly copy the big Knoppix compressed-drive onto your HD. You can extract the floppy-image and run the kernel via lilo (bootmanager) or loadlin (DOS). It will run exactly like from the CD-ROM, you won't be able to add anything, etc. There is some documentation about this floating around in this forum (and probably the docs too).

    I can also think about a less drastic knx-hdinstall script which extracts the compressed-drive image but doesn't disable the scripts. But I think you would need to patch the boot scripts in a lot of places to make it more like Debian (so you can use apt-get), not using the cloop and ramdrive, etc...

  5. #5
    Senior Member registered user
    Join Date
    Nov 2002
    Location
    USA, IL
    Posts
    1,041

    Re: hardware autoconfig

    ' apt-get update; apt-get install discover '

    Quote Originally Posted by feh3k
    I'm disappointed that no one has answered your question, which I think is an incredibly important one. Is there no solution to this??

Similar Threads

  1. Saving Configuration/stopping autoconfig?
    By ShaunMcGoldrick in forum Hdd Install / Debian / Apt
    Replies: 0
    Last Post: 11-29-2004, 01:15 AM
  2. knoppix-autoconfig
    By farawayuser in forum Customising & Remastering
    Replies: 2
    Last Post: 12-06-2003, 12:28 AM
  3. knoppix-autoconfig does not detect in HD
    By kim in forum General Support
    Replies: 4
    Last Post: 12-05-2003, 04:07 AM
  4. Add special hardware to the hardware detection on boot
    By Danmak in forum Hardware & Booting
    Replies: 3
    Last Post: 12-01-2003, 03:40 AM
  5. Req: /etc/init.d/alsa-autoconfig
    By Ragaprong in forum General Support
    Replies: 2
    Last Post: 11-11-2003, 06:37 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Cisco SG95-16 16-Port Gigabit Switch SG95-16-KR picture

Cisco SG95-16 16-Port Gigabit Switch SG95-16-KR

$47.00



Cisco WS-C3750-48PS-S 48-Port Managed Gigabit Switch picture

Cisco WS-C3750-48PS-S 48-Port Managed Gigabit Switch

$45.00



Cisco Nexus 48-Port 10G SFP+ Switch N9K-9396PX w/ 9K-M12PQ 12-Port 40G QSFP picture

Cisco Nexus 48-Port 10G SFP+ Switch N9K-9396PX w/ 9K-M12PQ 12-Port 40G QSFP

$419.99



Pakedge SE-18 Unmanaged 16-Port Ethernet Switch With 2-SFP Ports picture

Pakedge SE-18 Unmanaged 16-Port Ethernet Switch With 2-SFP Ports

$54.99



New Linksys SE3005 5-port Gigabit Ethernet Switch picture

New Linksys SE3005 5-port Gigabit Ethernet Switch

$15.99



Linksys SE3008 8 Ports Rack Mountable Gigabit Ethernet Switch picture

Linksys SE3008 8 Ports Rack Mountable Gigabit Ethernet Switch

$18.99



NETGEAR 5-Port Gigabit Ethernet Unmanaged Switch (GS305) - NEW IN BOX picture

NETGEAR 5-Port Gigabit Ethernet Unmanaged Switch (GS305) - NEW IN BOX

$18.99



Cisco WS-C3750X-48T-S 48 Port 3750X Gigabit Switch - Same Day Shipping picture

Cisco WS-C3750X-48T-S 48 Port 3750X Gigabit Switch - Same Day Shipping

$49.99



*NETGEAR PROSAFE (JGS524V2) 24-Port Gigabit Ethernet Switch *NO AC* picture

*NETGEAR PROSAFE (JGS524V2) 24-Port Gigabit Ethernet Switch *NO AC*

$29.99



ARUBA J9772A 2530-48G PoE+ 48 PORT ETHERNET SWITCH W/ RACK EARS J9772-60301 picture

ARUBA J9772A 2530-48G PoE+ 48 PORT ETHERNET SWITCH W/ RACK EARS J9772-60301

$143.32