Results 1 to 2 of 2

Thread: 32 bit or 64 bit

  1. #1
    Member registered user
    Join Date
    Dec 2006
    Posts
    49

    32 bit or 64 bit

    I have a 64-bit processor on a Dell 9360 machine.
    If I boot into Knoppix 8.2.0 Live from a portable drive and run simple queries as follows I get:
    $ lscpu
    Architecture: x86_64
    CPU op-mode(s): 32 bit,64 bit
    Flags: ... lm ...
    $ lshw -C processor | grep width
    width: 64 bits
    $ grep flags /proc/cpuinfo | grep " lm "
    Flags: ... lm ...

    which all confirm the 64-bit architecture. BUT the response
    CPU op-mode(s): 32 bit,64 bit
    apparently indicates that I am running a 64-bit-capable machine in 32-bit-mode.
    Yes? - is this a true interpretation?
    My /boot/isolinux/isolinux.cfg file contains the lines (omitting redundant qualifiers for ease of reading)
    DEFAULT fergus
    LABEL fergus
    KERNEL ifcpu64.c32
    APPEND knoppix64 -- knoppix
    APPEND knoppix64
    LABEL knoppix
    KERNEL linux
    APPEND initrd=minirt.gz
    LABEL knoppix64
    KERNEL linux64
    APPEND initrd=minirt.gz

    which I hoped meant "if 64-bit machine use 64-bit OS; if 32-bit machine use 32-bit OS" but apparently not.
    How can I tweak the isolinux.cfg file to behave as required one line up?
    Thank you!
    PS1 I have to admit (I have only just noticed) that the file ifcpu64.c32 referred to above is very suggestive of an instruction "if 64-bit machine use 32-bit OS". Is that what it achieves, and the cause of the mismatch described?
    PS2 I use this ifcpu file from the Knoppix 7.4.2 provision. I find the Knoppix 8.2.0 version stops Knoppix stone dead before it even starts. It simply does not work, at all. Anybody else?

  2. #2
    Junior Member
    Join Date
    Jun 2012
    Posts
    24
    Check out the Cheat Codes for optional bootup switches.

    http://knoppix.net/wiki/Cheat_Codes

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


HP ProLiant MicroServer Gen8 Server Xeon E3-1220L 16GB RAM No HDD's picture

HP ProLiant MicroServer Gen8 Server Xeon E3-1220L 16GB RAM No HDD's

$299.00



HP Proliant MicroServer Gen 8 2.3GHz CPU 16GB RAM NO DRIVES/CADDIES INCLUDED picture

HP Proliant MicroServer Gen 8 2.3GHz CPU 16GB RAM NO DRIVES/CADDIES INCLUDED

$179.99



HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ* picture

HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ*

$94.99



HP ProLiant MicroServer Gen8 Server Xeon E3-1220L 8GB RAM No HDD's picture

HP ProLiant MicroServer Gen8 Server Xeon E3-1220L 8GB RAM No HDD's

$229.99



HPE ProLiant MicroServer Gen 10 Plus, Xeon E-2224, 16GB DDR4, 1TB M.2 NVMe SSD picture

HPE ProLiant MicroServer Gen 10 Plus, Xeon E-2224, 16GB DDR4, 1TB M.2 NVMe SSD

$750.00



HP ProLiant N36L Micro Server 633724-001 AMD Athlon II Neo N36L - No HDDs picture

HP ProLiant N36L Micro Server 633724-001 AMD Athlon II Neo N36L - No HDDs

$82.07



HP ProLiant MicroServer Gen8 Server Intel Xeon E3-1220L v2 16GB DDR3 (4) 4TB HDs picture

HP ProLiant MicroServer Gen8 Server Intel Xeon E3-1220L v2 16GB DDR3 (4) 4TB HDs

$399.00



ProLiant MicroServer Gen8 Intel Xeon E3-1220L V2 2.3GHz CPU 8GB RAM picture

ProLiant MicroServer Gen8 Intel Xeon E3-1220L V2 2.3GHz CPU 8GB RAM

$170.00



HP ProLiant Microserver Micro Server HSTNS-5151 untested picture

HP ProLiant Microserver Micro Server HSTNS-5151 untested

$75.00



HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server P54644001 picture

HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server P54644001

$849.99