Results 1 to 5 of 5

Thread: A compromise for us who've installed Knoppix to the hd?

  1. #1
    Member registered user
    Join Date
    Jul 2003
    Location
    Purgatory
    Posts
    33

    A compromise for us who've installed Knoppix to the hd?

    How about, instead of a dvd, which not everyone will be able to use, making a multi-cd set for installing to the hard drive using all the apps that are on the dvd?

    And make it so that after Knopix is installed, it comes up with a screen for the user to install more software from these cds, as many as they have or don't, ala Red Hat?

  2. #2
    Junior Member
    Join Date
    Aug 2003
    Location
    Malmö, Sweden
    Posts
    2
    Then knoppix would loose it's function. The "thing" with knoppix is that it should boot from a cd and run without any installers. If you want to install knoppix in that way you mentioned above, why not try debian that knoppix is built from? Or any other linux distro...

  3. #3
    Junior Member
    Join Date
    Jun 2003
    Posts
    6

    Debian install != Knoppix

    Installing Debian from scratch to hard disk, while not exactly hard, isn't trivial either. And once you've done all the dselect/apt-get etc, you're still nowhere near the utility of Knoppix.

    Missing are all the neato-keen scripts and setups. It's the custom configuration and the auto-sensing hardware setup, the auto-mounting of usb drives and all the rest that make the Knoppix deal so much more.

    Of course, all that is possible in Debian, but that's the key and the problem. *You* have to do it.

    I'm all for seeing the Knoppix way become the Debian way of installing a base system. I'm a die-hard Debian user, but when installing for someone who's never seen it, there's always an apologetic "you have to do this, you have to do that, configure this that way, watch out for this, remember that" going on.

    Knoppix kind of removes all that. "Remember that Debian install we did last month ? Well, check this out !"

    D.

  4. #4
    Junior Member registered user
    Join Date
    Apr 2003
    Location
    Warsaw, IN
    Posts
    23

    Re: Debian install != Knoppix

    personally, I think the "knoppix-install"
    script they have on the knoppix CD is extremely unstable,

    if only there were another way to do it, and still get the knoppix feel on the hd, ya know?

    but I agree about the DVD, because not everyone has a DVD burner, I know I don't.. although I wouldn't mind purchasing a DVD to check it out

    only thing that gets me about knoppix in general, vs the others, its like, constantly in beta, so like, even the latest knoppix is very buggy.

    not much better then Fedora if you ask me. everyone complains about fedora being buggy and constantly in beta, well, so is knoppix.....
    and at least with knoppix there is an update like every week
    (thats why I don't like buying a CD of it because then I'd have to buy a new CD every week which would be a major pane in my pocketbook.)
    LOLOL

  5. #5
    Member registered user
    Join Date
    Nov 2003
    Posts
    50

    Re: A compromise for us who've installed Knoppix to the hd?

    Quote Originally Posted by three eyes open
    How about, instead of a dvd, which not everyone will be able to use, making a multi-cd set for installing to the hard drive using all the apps that are on the dvd?

    And make it so that after Knopix is installed, it comes up with a screen for the user to install more software from these cds, as many as they have or don't, ala Red Hat?
    If you want to install Knoppix 3.3 or higher on your harddrive just open a console and enter: sudo knoppix-installer
    or if you are running a older release use : sudo knx-hdinstall
    This will start the installer to do a Hard Drive load and just answer a few questions. 3.3 and up is realy easy.

Similar Threads

  1. I've got Knoppix installed on HD, but...
    By guicaste in forum Hdd Install / Debian / Apt
    Replies: 3
    Last Post: 06-12-2005, 01:30 AM
  2. Just Installed Knoppix!
    By naventus in forum The Lounge
    Replies: 2
    Last Post: 06-29-2004, 01:28 PM
  3. how can I get in the hd-installed Knoppix?
    By lmsaga in forum Hdd Install / Debian / Apt
    Replies: 8
    Last Post: 04-24-2004, 08:50 AM
  4. what happens when knoppix is hdd installed
    By waynejkruse10 in forum Hdd Install / Debian / Apt
    Replies: 2
    Last Post: 10-24-2003, 10:25 PM
  5. just installed knoppix to HDD and......
    By blahblahblah in forum General Support
    Replies: 7
    Last Post: 08-18-2003, 03:35 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 16GB | P204I | 2x300GB 10KRPM picture

HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 16GB | P204I | 2x300GB 10KRPM

$1419.00



HPE BL460c G10 ProLiant Blade | 2x Silver 4114 | 128GB | P204I | 2x1.2TB 10KRPM picture

HPE BL460c G10 ProLiant Blade | 2x Silver 4114 | 128GB | P204I | 2x1.2TB 10KRPM

$1869.00



Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS picture

Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS

$103.99



HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives picture

HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives

$59.98



Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG picture

Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG

$69.99



DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC picture

DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC

$50.00



HP ProLiant BL460c Server Blade (2 x  CPU) 24GB RAM/No Drives  picture

HP ProLiant BL460c Server Blade (2 x CPU) 24GB RAM/No Drives

$45.60



Dell PowerEdge VRTX 2x PowerEdge M630 Blade Server 512GB Ram Total w/ Rails picture

Dell PowerEdge VRTX 2x PowerEdge M630 Blade Server 512GB Ram Total w/ Rails

$1750.00



Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W picture

Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W

$399.00



Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric picture

Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric

$139.99