-
Senior Member
registered user
Greeting mezz et al.
My first thought was that perhaps the heat wave is getting to them over there. Check to be sure the DVD is not melting, reboot -- no better shut down and let it cool off for 1 hour -- take a cold shower ...
Sorry you have to put up with my humor.
Thy this method:
Open one shell and type
The shell will hang up but that is expected. Leave it open.
Now open a new shell and type
You should see
Best Wishes
paradocs
-
Junior Member
registered user
Originally Posted by
paradocs
Thy this method:
Open one shell and type
The shell will hang up but that is expected. Leave it open.
Now open a new shell and type
You should see
Thanks for humor, paradocs!!. Yes, it has been rather hot around here... But even your best wishes do not help! Get still the same message :
'
ERROR 2002: Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
'
I think there is something rotten in the state of Knoppix DVD and MySQL ...
Edwin, I agree with you : odder and odder. See what I get when I start MySQL on the 2003-07-26 CD
'
sudo less /ramdisk/var/log/mysql/mysql.err
30808 11:23:47 Error at /KNOPPIX/etc/init.d/mysql\n^G/usr/bin/mysqladmin: conn
ect to server at 'localhost' failed
error: 'Can't connect to local MySQL server through socket '/var/run/mysqld/mysq
ld.sock' (2)'
Check that mysqld is running and that the socket: '/var/run/mysqld/mysqld.sock'
exists!
030808 11:23:47 mysqld started
030808 11:23:48 Error at /KNOPPIX/etc/init.d/mysql\n^G/usr/bin/mysqladmin: conn
ect to server at 'localhost' failed
error: 'Can't connect to local MySQL server through socket '/var/run/mysqld/mysq
ld.sock' (2)'
Check that mysqld is running and that the socket: '/var/run/mysqld/mysqld.sock'
exists!
Warning: Ignoring user change to 'mysql' because the user was set to 'mysql' ear
lier on the command line
/usr/sbin/mysqld: ready for connections.
Version: '4.0.13-log' socket: '/var/run/mysqld/mysqld.sock' port: 0
'
But for the rest everything goes fine ...
Wishing you all the best as well!
Regards,
Georges.
-
mzee,
I only spotted this just now (must be the heat), so I give it another try.
When attempting to copy the host.* files you used:
Code:
sudo cp -f /mnt/floppy/host.frm /KNOPPIX/var/lib/mysql/mysql
cp: cannot remove `/KNOPPIX/var/lib/mysql/mysql/host.frm': Read-only file system
You used '/KNOPPIX' as root for the destination where I used '/' This is a session from a CD boot:
Code:
knoppix@ttyp0[knoppix]$ sudo cp -f /mnt/floppy/host.frm /KNOPPIX/var/lib/mysql/mysql
cp: cannot remove `/KNOPPIX/var/lib/mysql/mysql/host.frm': Read-only file system
knoppix@ttyp0[knoppix]$ cat /KNOPPIX/var/lib/mysql/mysql/host.frm
cat: /KNOPPIX/var/lib/mysql/mysql/host.frm: Permission denied
knoppix@ttyp0[knoppix]$ sudo cp -f /mnt/floppy/host.frm /var/lib/mysql/mysql
knoppix@ttyp0[knoppix]$ cat /var/lib/mysql/mysql/host.frm
This is a test file
This is not a MySql-table-description file
knoppix@ttyp0[knoppix]$
I don't know what this '/KNOPPIX' is (on the CD?) but we are clearly not supposed to mess with it. Using plain '/' as root works BTW. After my little sabotage-act MySql wouldn't start, complaining about incorrect information in host.frm.
Regards,
- - Edwin
-
Junior Member
registered user
Originally Posted by
Edwin
This is a session from a CD boot:
Code:
knoppix@ttyp0[knoppix]$ sudo cp -f /mnt/floppy/host.frm /KNOPPIX/var/lib/mysql/mysql
cp: cannot remove `/KNOPPIX/var/lib/mysql/mysql/host.frm': Read-only file system
knoppix@ttyp0[knoppix]$ cat /KNOPPIX/var/lib/mysql/mysql/host.frm
cat: /KNOPPIX/var/lib/mysql/mysql/host.frm: Permission denied
knoppix@ttyp0[knoppix]$ sudo cp -f /mnt/floppy/host.frm /var/lib/mysql/mysql
knoppix@ttyp0[knoppix]$ cat /var/lib/mysql/mysql/host.frm
This is a test file
This is not a MySql-table-description file
knoppix@ttyp0[knoppix]$
Thank you for keeping on!
I followed your advice but with the same results :
'
030808 20:54:05 Error at /KNOPPIX/etc/init.d/mysql\n^G/usr/bin/mysqladmin: conn
ect to server at 'localhost' failed
error: 'Can't connect to local MySQL server through socket '/var/run/mysqld/mysq
ld.sock' (2)'
Check that mysqld is running and that the socket: '/var/run/mysqld/mysqld.sock'
exists!
030808 20:54:06 Error at /KNOPPIX/etc/init.d/mysql\n^G/usr/bin/mysqladmin: conn
ect to server at 'localhost' failed
error: 'Can't connect to local MySQL server through socket '/var/run/mysqld/mysq
ld.sock' (2)'
Check that mysqld is running and that the socket: '/var/run/mysqld/mysqld.sock'
exists!
'
Suggest we drop the subject. The Knoppix LinuxTag DVD is nice but MySQL on it doesn't work ....
Happily MySQL works with the 20030606 and 20030726 Live CD's, although in a strange way : see my previous mail.
Wish to thank you and the others for kind attention.
Best Regards,
Georges.
-
ERROR MYSQL EN UBUNTU
Originally Posted by
Edwin
I am not familiair with the DVD version, but does it start the mysql daemon automaticly at boot? Or do you start it manually? If the first go through the boot messages with 'dmesg' in a console. Look for error messages. If the last, what does it say after you start it?
Also check if the deamon is running with 'ps -A | grep mysql'. If this returns some processes have a look at /var/log/mysql/mysql.err (as root). Do you have a mysql.pid file in /var/run/mysqld?
HTH
- - Edwin
Hi, yo tambien tengo el mismo error.
Y no, no tengo el mysql.pid...
No se cual pueda ser el probelma.
Slds
-
mysql not running Konppix 4.0.1
Hi,
I just downloaded the 4.0.1 DVD version of knoppix and have the same problems to run mysql
As there is no mysqld_safe file on the system, i tried to start it via "/etc/init.d/mysql start" as root. There must be a problem in this compilation
Starting MySQL database server: mysqld...failed.
Please take a look at the syslog.
/usr/bin/mysqladmin: connect to server at 'localhost' failed
error: 'Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)'
Check that mysqld is running and that the socket: '/var/run/mysqld/mysqld.sock' exists!
If I tried to start via mysqld_safe I get the following:
root@3[www]# Starting mysqld daemon with databases from /var/lib/mysql
mysqld_safe[14763]: started
STOPPING server from pid file /var/run/mysqld/mysqld.pid
mysqld_safe[14769]: ended
Does anyone have a solution now for that?
Thanks,
Wolfixx
-
You have to edit /etc/mysql/my.cnf
Uncomment the line with: old_passwords = 1
-
thx
Hi Impf,
Thank you very much; now it works
Wolfixx
Similar Threads
-
By dr_rude in forum General Support
Replies: 2
Last Post: 10-11-2004, 02:37 AM
-
By sniker in forum Hdd Install / Debian / Apt
Replies: 2
Last Post: 10-08-2004, 03:50 AM
-
By Coume in forum General Support
Replies: 5
Last Post: 08-06-2003, 06:42 AM
-
By Coume in forum Hdd Install / Debian / Apt
Replies: 3
Last Post: 08-04-2003, 07:00 AM
-
By Terry@nz in forum General Support
Replies: 3
Last Post: 06-09-2003, 10:01 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
HP Workstation Z640 2x Xeon E5-2623V4 32GB Ram 2x 256GB SSD Quadro 2000 Linux GA
$249.99
Dell Precision 5810 Workstation Xeon E5-1650 6C 3.5GHz 16GB 500GB Win10 K2200
$115.94
HP Z230 Workstation Towers Xeon E3-1231 V3 3.20ghz 8GB Ram NO HDD
$39.96
Dell Precision T3600 XEON E5-1607 3.0GHz 16GB RAM 500GB HD WIN10 Pro Workstation
$99.00
SR1XP Intel Xeon E5-2680 v3 12 Core 30MB 2.5GHz LGA 2011-3 Grade A Processor
$4.50
Intel Xeon E5-2699 v3 2.3GHz 18-Core 45MB 145W LGA2011-3 CPU/Processor SR1XD
$40.99
Genuine Intel Xeon E5-2680V4 2.40Ghz 14-Core 35MB LGA2011 CPU P/N: SR2N7
$14.99
Intel Xeon E5-2695 V4 @2.10GHz SR2J1 Socket LGA2011 18-Core Server CPU Processor
$40.40
Intel Xeon E5-2697 v4 2.3GHz 18-Core Processor CPU LGA2011 SR2JV
$49.99
Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config
$489.99