Results 1 to 9 of 9

Thread: error when booting from a KNOPPIX_V3.2-2003-07-26-EN cd

  1. #1
    Junior Member
    Join Date
    Aug 2003
    Posts
    3

    error when booting from a KNOPPIX_V3.2-2003-07-26-EN cd

    When de boot line appers i execute this command
    knoppix lang = us

    After looking of drives and hardware
    then this screen appers

    Welcome to the knoppix live linux-on-CD!

    Accessing Knopixx CDROM at /dev/scd1... /modules/cloop.o : init_module:
    Hint: insmod errors can be caused by incorrect module parameters, including invalid io or irq parameters.
    Can't find KNOPPiX filesystem, sorry.

    Dropping you to (very limited) shell.
    Press reset button to quit.

    Additional bulitin commands available:
    cat mount unmount
    insmod rmmod ls mod

    knoppix#

    that's all

    Any information on how can i get it to work would be great.

    Thank you very much.

  2. #2
    Senior Member registered user
    Join Date
    Feb 2003
    Location
    Nova Scotia, Canada
    Posts
    2,479
    What cheat codes besides the lang=us have you tried I would suggest knoppix testcd to make sure the cd is good and just failsafe at the boot: prompt to boot with minimal hardware detection. Also some details on your hardware would be of some use in trying to help you.

  3. #3
    Junior Member
    Join Date
    Aug 2003
    Posts
    3
    I tried failsafe and the same error happends

    I tried test cd and a get this message
    "Could no found kernel moduele" or somthing similar, i dont remember the exacts words.

    Hope this information let u find the problem.

    Thanks

  4. #4
    Senior Member registered user
    Join Date
    Feb 2003
    Location
    Nova Scotia, Canada
    Posts
    2,479
    If it failed the knoppix testcd then you have a bad CD you will have to re-burn the cd and you should check to see if the .iso image is good before you do that you can see FAQ Downloading for information on checking it.

  5. #5
    Junior Member
    Join Date
    Aug 2003
    Posts
    3
    I have found that the cd is not the problem, because it worked on my fathers pc wich configuration is

    motherboard asus a7n266-vm (has integrated video and sound cards)
    chip athol xp 2.0 GHZ

    The pc that i used before has a PIII 866 Hz chip on a soyo sy-7vba 133u motherboard with a geoforce 2 440 64mb

    I also tried in this last computer fails safe and it didnt chaged nothing same error same screen, testcd wont work on both pcs.

    Thanks

  6. #6
    Junior Member
    Join Date
    Aug 2003
    Posts
    4

    Boot errors with KNOPPIX_V3.2-2003-07-26-EN AND 07-27-EN CD

    I have the following errors at boot.

    Error: one processor found.
    hdc: lost interupt x2
    hdd: lost interupt x2
    hdc: lost interupt 1x
    kernel BUG at ide-iops.c:1262!
    invalid operad: 0000

    then a lot more things like EFLAGS: 00010082 and some stack errornos.. It ends with a Kernel panic: Aiee, killing interupt handler! In interupt handler - not syncing. After which the system freezes.

    I have this excact same error with the 2 last knoppix 3.2 iso's. Knoppix 3.1 works fine though. I've burned them with NEro and did an MD5 chechsum error (which gave mo errors).

    This happens also in "failsave"-mode (this is obviously not a failsave after all).

    Needles to say I'm very dissapointed at all in this "new " version...

    My system ECS K7S5A mainboard (SIS735 c/s), SB PCI128 soundcard, DVDplayer (Pioneer 106) and Nec DVDRW 1100. I have 512MB Ram and an AMD XP2400 cpu. The videocard is an original Radeon (1) 64MB DDR vivo.

    Nothing sppecial I think. I even burned a CD at 2x speed to no avail.

    If this the way to introduce ppl into Linux then I think it'll fail misserably.

    Perhaps a name change is in order eg. knopsux

    Sorry couldn't help it.....

    Regards,

    Manu T

  7. #7
    Senior Member registered user
    Join Date
    Feb 2003
    Posts
    929
    Just a thought: try turning off Plug and Play OS in your bios (you can always turn it on again).

  8. #8
    Junior Member
    Join Date
    Aug 2003
    Posts
    4
    Forget my previous post.

    Disabling PnP in the bios doesn't help but booting with the noapic option does.

    Regards,

    Manu T

  9. #9
    Senior Member registered user
    Join Date
    Nov 2002
    Posts
    1,353
    Quote Originally Posted by Magio
    I have found that the cd is not the problem, because it worked on my fathers pc wich configuration is

    motherboard asus a7n266-vm (has integrated video and sound cards)
    chip athol xp 2.0 GHZ

    The pc that i used before has a PIII 866 Hz chip on a soyo sy-7vba 133u motherboard with a geoforce 2 440 64mb

    I also tried in this last computer fails safe and it didnt chaged nothing same error same screen, testcd wont work on both pcs.

    Thanks
    Well, I'm not sure the fact that it ran on another computer is a sure test that you don't have a bad cd. Different computers with different hardware configurations will most likely be accessing different sections of the cd during boot: thus a bad cd may boot on one computer and not another. It's worth following Stephen's advice and testing the cd.

Similar Threads

  1. KNOPPIX_V3.3-2003-11-19-EN.iso.md5
    By A. Jorge Garcia in forum General Support
    Replies: 5
    Last Post: 01-07-2004, 09:17 PM
  2. KNOPPIX_V3.3-2003-10-28-EN on bittorrent, what's new?
    By gneumarke in forum General Support
    Replies: 3
    Last Post: 11-03-2003, 02:32 PM
  3. KNOPPIX_V3.2-2003-07-26 - display problems
    By Sucker in forum General Support
    Replies: 4
    Last Post: 08-04-2003, 03:12 AM
  4. Making KNOPPIX_V3.2-2003-06-06-EN.ISO
    By yhw22 in forum Customising & Remastering
    Replies: 2
    Last Post: 07-20-2003, 07:13 PM
  5. KNOPPIX_V3.1-2002-12-12-EN.iso vs V3.1-2003-01-20-EN.iso
    By audioaficionado in forum General Support
    Replies: 2
    Last Post: 02-05-2003, 10:07 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


1TB/2TB USB 3.0 Flash Drive Thumb U Disk Memory Stick Pen PC Laptop Storage lot picture

1TB/2TB USB 3.0 Flash Drive Thumb U Disk Memory Stick Pen PC Laptop Storage lot

$80.39



Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5

Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR

$24.99



Type C USB 3.0 Flash Drive Thumb Drive Memory Stick for PC Laptop 1TB 2TB lot picture

Type C USB 3.0 Flash Drive Thumb Drive Memory Stick for PC Laptop 1TB 2TB lot

$73.29



Fanxiang SSD 4TB 2TB 1TB PS5 SSD M.2 NVME SSD 7300MBS PCIe 4.0 Solid State Drive picture

Fanxiang SSD 4TB 2TB 1TB PS5 SSD M.2 NVME SSD 7300MBS PCIe 4.0 Solid State Drive

$269.99



CISCO A03-D1TBSATA 1TB 7.2K 6G 2.5INCH SATA HDD picture

CISCO A03-D1TBSATA 1TB 7.2K 6G 2.5INCH SATA HDD

$9.00



Patriot P210 128GB 256GB 512GB 1TB 2TB 2.5

Patriot P210 128GB 256GB 512GB 1TB 2TB 2.5" SATA 3 6GB/s Internal SSD PC/MAC Lot

$19.99



1TB Portable External 2.5 inch sata (Hard Drive)(random color delievery) picture

1TB Portable External 2.5 inch sata (Hard Drive)(random color delievery)

$9.99



Seagate ST1000LM035 Mobile HDD 1TB 2.5

Seagate ST1000LM035 Mobile HDD 1TB 2.5" SATA III Laptop Hard Drive 0 Relocated

$18.88



2TB USB 3.0 Flash Drive Thumb U Disk Memory Stick Pen PC Laptop Storage US picture

2TB USB 3.0 Flash Drive Thumb U Disk Memory Stick Pen PC Laptop Storage US

$41.69



Samsung 980 PRO 1TB SSD, PCIe 4.0 x 4 M.2, M.2 2280 Internal Solid State... picture

Samsung 980 PRO 1TB SSD, PCIe 4.0 x 4 M.2, M.2 2280 Internal Solid State...

$65.00