-
starting linuxrc and init
Hi Folks,
I try to build my own Knoppix based CD. For this I try to build my own initrd.
Ok my first problem was that the kernel didn't start my linuxrc. I found the reason. If the
root-Filesystem (root= parameter from syslinux) is the same as ram0 (in my case the initrd-fs) the kernel didn't execute linuxrc and step over to execute init.
(this is in do_mounts.c in function "void prepare_namespace(void)" - Linux 2.4.20)
Ok.. I that this is no problem. I will pass no root boot option (or a wrong) and I'll set this in linuxrc but... in this case the kernel stops because he couldn't load modules and other messages (depending with root-option you give)
My question: Do you know how knoppix handle this issue?
Thanks,
Thomas
-
Senior Member
registered user
You are probally best to start off by remastering before trying to build one from scratch.
see http://www.knoppix.net/docs/index.ph...masteringHowto
also you may be interested to see how to replace the kernel :
http://www.knoppix.net/docs/index.ph...tomKernelHowto
-
Hi eadz,
thx for posting a reply. I read the both Webpages, but they didn't cover my questions.
It would be cool if someone has an idea how to solve this prob.
Thanks,
Thomas
-
Senior Member
registered user
Re: starting linuxrc and init
Originally Posted by
thomas
Hi Folks,
I try to build my own Knoppix based CD. For this I try to build my own initrd.
Ok my first problem was that the kernel didn't start my linuxrc. I found the reason. If the
root-Filesystem (root= parameter from syslinux) is the same as ram0 (in my case the initrd-fs) the kernel didn't execute linuxrc and step over to execute init.
(this is in do_mounts.c in function "void prepare_namespace(void)" - Linux 2.4.20)
Ok.. I that this is no problem. I will pass no root boot option (or a wrong) and I'll set this in linuxrc but... in this case the kernel stops because he couldn't load modules and other messages (depending with root-option you give)
Okay, i'll give it a shot. If i understand correctly, you are trying to boot your initrd filesystem with the root= option. However, to load a filesystem into ram to boot with (as root), you need the initrd= kerneloption instead. Then, linuxrc should be executed like usual.
Hope this helps,
Similar Threads
-
Replies: 0
Last Post: 09-01-2004, 06:20 PM
-
By ManiOne in forum General Support
Replies: 1
Last Post: 08-11-2004, 11:36 AM
-
By bongski55 in forum The Lounge
Replies: 2
Last Post: 05-11-2004, 11:56 AM
-
By darthczyz in forum Customising & Remastering
Replies: 0
Last Post: 04-08-2004, 01:15 PM
-
By berdy in forum General Support
Replies: 12
Last Post: 08-18-2003, 06:25 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$274.00
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$79.19
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell Emc R750 Computer Poweredge edge racked server.
$750.00
Dell PowerEdge R730, 2 sinks, SystemBoard, 8 trays,H330,Idrac 8 exp, 2x750w Psu
$135.00
Dell PowerEdge R730 Server 2x E5-2670v3 2.30Ghz 24-Core 128GB H730
$411.75
Dell PowerEdge R720 Server | 2x E5-2660 2.2GHz | 128GB Ram | 1.2TB HDD | H710P
$179.00
DELL PowerEdge R630 8SFF Server 2x E5-2680v3 2.5GHz =24 Cores 128GB H730 4xRJ45
$360.00