-
starting linuxrc and init
Hi Folks,
I try to build my own Knoppix based CD. For this I try to build my own initrd.
Ok my first problem was that the kernel didn't start my linuxrc. I found the reason. If the
root-Filesystem (root= parameter from syslinux) is the same as ram0 (in my case the initrd-fs) the kernel didn't execute linuxrc and step over to execute init.
(this is in do_mounts.c in function "void prepare_namespace(void)" - Linux 2.4.20)
Ok.. I that this is no problem. I will pass no root boot option (or a wrong) and I'll set this in linuxrc but... in this case the kernel stops because he couldn't load modules and other messages (depending with root-option you give)
My question: Do you know how knoppix handle this issue?
Thanks,
Thomas
-
Senior Member
registered user
You are probally best to start off by remastering before trying to build one from scratch.
see http://www.knoppix.net/docs/index.ph...masteringHowto
also you may be interested to see how to replace the kernel :
http://www.knoppix.net/docs/index.ph...tomKernelHowto
-
Hi eadz,
thx for posting a reply. I read the both Webpages, but they didn't cover my questions.
It would be cool if someone has an idea how to solve this prob.
Thanks,
Thomas
-
Senior Member
registered user
Re: starting linuxrc and init
Originally Posted by
thomas
Hi Folks,
I try to build my own Knoppix based CD. For this I try to build my own initrd.
Ok my first problem was that the kernel didn't start my linuxrc. I found the reason. If the
root-Filesystem (root= parameter from syslinux) is the same as ram0 (in my case the initrd-fs) the kernel didn't execute linuxrc and step over to execute init.
(this is in do_mounts.c in function "void prepare_namespace(void)" - Linux 2.4.20)
Ok.. I that this is no problem. I will pass no root boot option (or a wrong) and I'll set this in linuxrc but... in this case the kernel stops because he couldn't load modules and other messages (depending with root-option you give)
Okay, i'll give it a shot. If i understand correctly, you are trying to boot your initrd filesystem with the root= option. However, to load a filesystem into ram to boot with (as root), you need the initrd= kerneloption instead. Then, linuxrc should be executed like usual.
Hope this helps,
Similar Threads
-
Replies: 0
Last Post: 09-01-2004, 06:20 PM
-
By ManiOne in forum General Support
Replies: 1
Last Post: 08-11-2004, 11:36 AM
-
By bongski55 in forum The Lounge
Replies: 2
Last Post: 05-11-2004, 11:56 AM
-
By darthczyz in forum Customising & Remastering
Replies: 0
Last Post: 04-08-2004, 01:15 PM
-
By berdy in forum General Support
Replies: 12
Last Post: 08-18-2003, 06:25 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Cisco 2801 Integrated Services Router ISR w/ WIC-1DSU-1-v2, VIC2-2FXS CISCO2801
$59.99
Cisco 2900 Series CISCO2951/K9 v03 Integrated Services Router
$54.99
Cisco Nexus 48-Port 10G SFP+ Switch N9K-9396PX w/ 9K-M12PQ 12-Port 40G QSFP
$249.99
Cisco C6807-XL Catalyst Switch Chassis
$149.99
Cisco WS-C3850-48P-L 48-Port Gigabit 3850 PoE Switch w/ 715W+ C3850-NM-4-1G Mod
$83.00
Cisco Nexus N3K-C3064TQ-10GT 48P 10GbE RJ45 4P 40GbE QSFP+ Switch NX-OS SW LAN
$350.00
Cisco QSFP-40G-SR-BD BiDi Short-reach Transceiver, 1 Year Warranty
$17.25
Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850
$38.99
Cisco WS-C3850-48F-S Catalyst 3850 48x 1GB PoE+ RJ-45 1x Module Switch
$185.00
Cisco WS-C3850-48P-L 48-Port Gigabit 3850 PoE Switch w/ 715W Network Switch
$41.43