-
starting linuxrc and init
Hi Folks,
I try to build my own Knoppix based CD. For this I try to build my own initrd.
Ok my first problem was that the kernel didn't start my linuxrc. I found the reason. If the
root-Filesystem (root= parameter from syslinux) is the same as ram0 (in my case the initrd-fs) the kernel didn't execute linuxrc and step over to execute init.
(this is in do_mounts.c in function "void prepare_namespace(void)" - Linux 2.4.20)
Ok.. I that this is no problem. I will pass no root boot option (or a wrong) and I'll set this in linuxrc but... in this case the kernel stops because he couldn't load modules and other messages (depending with root-option you give)
My question: Do you know how knoppix handle this issue?
Thanks,
Thomas
-
Senior Member
registered user
You are probally best to start off by remastering before trying to build one from scratch.
see http://www.knoppix.net/docs/index.ph...masteringHowto
also you may be interested to see how to replace the kernel :
http://www.knoppix.net/docs/index.ph...tomKernelHowto
-
Hi eadz,
thx for posting a reply. I read the both Webpages, but they didn't cover my questions.
It would be cool if someone has an idea how to solve this prob.
Thanks,
Thomas
-
Senior Member
registered user
Re: starting linuxrc and init
Originally Posted by
thomas
Hi Folks,
I try to build my own Knoppix based CD. For this I try to build my own initrd.
Ok my first problem was that the kernel didn't start my linuxrc. I found the reason. If the
root-Filesystem (root= parameter from syslinux) is the same as ram0 (in my case the initrd-fs) the kernel didn't execute linuxrc and step over to execute init.
(this is in do_mounts.c in function "void prepare_namespace(void)" - Linux 2.4.20)
Ok.. I that this is no problem. I will pass no root boot option (or a wrong) and I'll set this in linuxrc but... in this case the kernel stops because he couldn't load modules and other messages (depending with root-option you give)
Okay, i'll give it a shot. If i understand correctly, you are trying to boot your initrd filesystem with the root= option. However, to load a filesystem into ram to boot with (as root), you need the initrd= kerneloption instead. Then, linuxrc should be executed like usual.
Hope this helps,
Similar Threads
-
Replies: 0
Last Post: 09-01-2004, 06:20 PM
-
By ManiOne in forum General Support
Replies: 1
Last Post: 08-11-2004, 11:36 AM
-
By bongski55 in forum The Lounge
Replies: 2
Last Post: 05-11-2004, 11:56 AM
-
By darthczyz in forum Customising & Remastering
Replies: 0
Last Post: 04-08-2004, 01:15 PM
-
By berdy in forum General Support
Replies: 12
Last Post: 08-18-2003, 06:25 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
HP PROLIANT MICROSERVER MICRO SERVER HSTNS-5151 T4 Used.
$45.00
HP ProLiant Xeon E3-1220L V2 16 GB RAM 2.30 GHz MicroServer Gen8 NO DRIVES
$174.99
HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ*
$94.99
Supermicro Server Tower Xeon BOOTS E5-2620 v4 2.10GHz 64GB RAM NO HDD NO OS
$199.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon
$846.19
SUPERMICRO CSE-512 AMD Opteron Processor 6128, 32GB DDR3 RAM NO HDD
$90.00
Supermicro 5018A-FTN4 Rack Server - Black
$125.00
2U 12 Bay SAS3 SuperMicro Server 6028U-TR4T+ W/ X10DRU-i+ Barebone 12 Caddy RAIL
$299.00
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00