If you want the Kernel-Headers also,
apt-get install kernel-headers-2.4.20-xfs
NOTE: With this build you have to use orginal .config file in /usr/source/linux/linux-2.4.20-xfs .
ALSO: ONLY use this if you have an fresh HDD install of Knoppix or NO programs compiled!!!!!! If Modem is your only compiled program, no problem. But you will have to re-install it to get it to work.
Download:
http://developer.linuxtag.net/knoppi...Custom_all.deb
Go into konsole and su <password> and chmod a+rw /home -R .
(Its read-only)
chmod a+rw /usr/src -R
Launch Kpackage and Install.
su <password>
cd /usr/src
bunzip2 kernel-source-2.4.20-xfs.tar.bz2
tar -xvf kernel-source-2.4.20-xfs.tar
cp /usr/src/linux-2.4.20-xfs/include/asm-i386/system.h /usr/src/kernel-source-2.4.20-xfs/include/asm-i386
overwrite? Y
rm linux
ln -s kernel-source-2.4.20-xfs linux
cd linux
make clean
make mrproper
make xconfig
(Don't make any selections!)
BUTTON: Load configuration File
/usr/src/linux-2.4.20-xfs/.config (Can use CNTRL V) to patse in
BUTTON: Save and Exit
make dep
make bzImage
make modules (Take an Break)
cp /usr/src/linux/arch/i386/boot/bzImage /boot/vmlinuz-test
cp /usr/src/linux/System.map /boot/System.map-test
mv /lib/modules/2.4.20-xfs /lib/modules/2.4.20-xfs.old
make modules_install
kwrite %U
Open /etc/lilo.config
We want to add another description like your regular boot for Knoppix.
EXAMPLE:
image=/boot/vmlinuz-2.4.20-xfs <--- This is my Boot-Up for Knoppix
label=Knoppix
root=/dev/hdg6 <--- Yours will be different!
read-only
initrd=/boot/initrd.gz
image=/boot/vmlinuz-test <--- I added these 5 lines.
label=Knoppix-test
root=/dev/hdg6 <--- Insert Yours from Above!!!
read-only
initrd=/boot/initrd.gz
Now we have 2 Boot Promps: Knoppix and Knoppix-test, you may also have one for Windows.
SAVE lilo.conf
From Konsole,
lilo
Screen will return with:
Added Knoppix
Knoppix-test
and any other Boot prompts in lilo.conf
That's - RE-BOOT and load Knoppix-test and go to Launch Control Center and go to System Adminstration - Linux Kernel and you can
see whats enabled in your Kernel.
IMPORTANT: DO THIS!!! (Now or Later) Will EXPLAIN BELOW!!!!
image=/boot/vmlinuz-2.4.20-xfs <--- This is my Boot-Up for Knoppix
label=Knoppix <--- Rename this Fail-Safe <---
root=/dev/hdg6 <--- Yours will be different!
read-only
initrd=/boot/initrd.gz
image=/boot/vmlinuz-test <--- I added these 5 lines.
label=Knoppix-test <--- Rename this Knoppix <---
root=/dev/hdg6 <--- Insert Yours from Above!!!
read-only
initrd=/boot/initrd.gz
Move the new Knoppix above Fail-Safe, and Your Boot Screen will
look like this:
Knoppix
Fail-Safe
Windows <--- If you have an Windows Entry.
THE REASON !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!
Since we moved /lib/modules/2.4.20-xfs to 2.4.20-xfs.old ,
we want to rename Knoppix-test to Knoppix (It's using these librays!)
For you Expert's: Maybe you can clue me in, if I try:
(NO-ONE DO THE FOLLOWING!)
mv vmlinuz-2.4.20-xfs vmlinuz-2.4.20-xfs.old
mv vmlinuz-test vmlinuz-2.4.20-xfs
mv System.map System.map.old
mv System.map-test System.map
Both Knoppix's boot OK, But the Orginal Knoppix 2.4.20-xfs,
go to /etc/init.d/bootmisc.sh - It won't open OR will any others. In
Knoppix-test They Will! I expect it has something to do with
mv /lib/modules/2.4.20-xfs /lib/modules/2.4.20-xfs.old .
That's why I had everbody rename:
image=/boot/vmlinuz-test <---
label=Knoppix-test <--- Rename this Knoppix
and put at top of lilo.conf .
If you want the Kernel-Headers also,
apt-get install kernel-headers-2.4.20-xfs
Some Updates,
I just rebuild my kernel again - no problem from my procedure.
Other problen, not associated with the Kernel Rebuild.
THIS IS for newbies, to clear up 3-4 very,very minor parts in Recompile.
1) cp /usr/src/linux-2.4.20-xfs/include/asm-i386/system.h /usr/src/kernel-source-2.4.20-xfs/include/asm-i386
This is one line on command line with 1 space between
h /usr/src ..ect
2) Any questions from compiler not listed - ANSWER Y
3) make modules (runs about 20 min on 1400MHZ CPU)
4) Close all Kwrite windows after done editing lilo.config -
so you can do the command lilo .
5) Read the last Example (Closely) so to get it right.
Thats it, I'm up and running on this procedure for a second time. I copyed and pasted from this page - no problems.
Enjoy Knoppix !
IMPORTANT
DO NOT USE THIS METHOD
USE THE ONE BELOW !!!
http://www.knoppix.net/forum/viewtop...?p=21477#21477
HP ProLiant DL360 G9 Server | 2 x E5-2660V3 2.6Ghz | 64GB | 2 x 900GB SAS HDD
$339.00
Supermicro 4U 36 Bay Storage Server 2.2Ghz 16-C 128GB 1x1280W Rails TrueNAS ZFS
$716.98
Dell R730xd 12LFF 2.6Ghz 20-C 128GB H730 2x10G+2x1G NIC 2x1100W 12x Trays Rails
$721.05
Dell Poweredge R640 Server | 2x Silver 4114 20 Cores | 192GB | 8x HDD Trays
$1939.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$79.19
HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD
$196.95
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$274.00
DELL R730XD Server 2x E5-2680v4 2.4GHz =28 Cores 128GB H730 4x 1.2TB SAS 4xRJ45
$504.00