is the MBR on thumb drive the same as it is on harddisk ? I always thought that they are very different as some of them have security feature(as a boot device) which makes me think that they must be special.
this is my problem i tryed to partition a thumb drive with windows disk manager i messed up the MBR so i tryed the recovery console FIXMBR didn't work to no suprise. Is there a Way to fix the mbr in knoppix. Because windows Sucks.
Thanks,
Wingman0
is the MBR on thumb drive the same as it is on harddisk ? I always thought that they are very different as some of them have security feature(as a boot device) which makes me think that they must be special.
its the same? this thumb drive dosen't have a lock
--I use a CF card with a Dazzle USB reader/writer. I tried partitioning the card with Linux but it screwed up the filesystem in Windoze. Dazzle provides some software to "reset" / reformat the CF card, so I used that. (This is all in Win98 BTW.)
--Go to the mfr's site and see if they have any utility software. If they don't (you should always try the "native" windoze solutions 1st) you can try the 'install-mbr' prog in Linux.
' man install-mbr '
--What I ended up doing is having a loopback file on the drive for native-linux filesystem (ext2.)
After you get it fixed:
' cd /mnt/flash ' (or wherever it is)
' dd if=/dev/zero of=blahblahsisboombah.mnt bs=1M count=50 ' == Create 50 meg file
' mke2fs -m1 blahblahsisboombah.mnt '
' mkdir /mnt/blah ' == Create a mount point for the loopback
' mount /mnt/flash/blahblahsisboombah.mnt /mnt/blah -oloop,noatime '
Here's what my CF looks like:
--Sample Entries for /etc/fstab:Code:fdisk -l /dev/sde Disk /dev/sde: 8 heads, 32 sectors, 490 cylinders Units = cylinders of 256 * 512 bytes Device Boot Start End Blocks Id System /dev/sde1 1 490 62704 6 FAT16--If you leave the drive partitioned, Windoze may not like it.Code:/dev/sde1 /mnt/flash auto defaults,auto,noatime,user,suid,exec,rw 0 0 /mnt/flash/usrlocalbin.mnt /mnt/usrlocalbin auto defaults,loop,auto,noatime,user,suid,exec,rw 0 0
Originally Posted by Wingman0
LOT OF 10 HPE JD092B X130 10G SFP+ LC SR Transceiver
$40.00
NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*
$18.00
New Cisco GLC-TE 1G SFP Copper RJ45 100m 1000BASE-T Transceiver Module
$19.99
For Cisco SFP-10G-T, Ubiquiti UF-RJ45-10G Transceiver, SFP+ to RJ45 10GBase-T
$47.49
NEW FS SFP-10G-T 10GBASE T SFP+ 30M Transceiver Module (Lot of 1 Unit)
$39.95
HP 10Gb SR SFP+ 10GBASE-SR 455885-001 10Gigabit Ethernet Transceiver 456096-001
$6.99
🔥🔥🔥SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GB SFP+ Multi Module🔥🔥
$6.80
Precision PRE-SFP-TMI-CSCO 1GB BASE-T RJ-45 SFP Transceiver - For Cisco
$2.89
New Sealed Cisco SFP-10G-LR 10GBASE-LR SFP Plug-in Transceiver Module
$15.00
Ubiquiti Networks UniFi USW-24 Gigabit Managed Switch/SFP, 24-Port
$190.00