Where does it hang and what messages are you getting?Originally Posted by kx14386
Hello boys an girls,
several weeks ago I have spent several days and installed successfully on my Toshi KX-2003-06-06. (32MB RAM 8GB HDD)
Now I am trying to install KX-2003-07-26 without destroying my previous installation but my Toshi don't like it.javascript:emoticon('')
It hangs on several different steps during booting from the KX-CD.
The previous Installation KX-2003-06-06 is still running, hier the output of "lspci -v"
00:00.0 Host bridge: Toshiba America Info Systems 601 (rev 11)
Flags: busmaster, medium devsel, satency 0
00:04.0 VGA compatible controller: Chips and Techjnologies F65550 (rev 05) (prog-if 00 [VGA])
Flags: stepping, medium devsel
Memory at fe000000 (32-bit, non prefetchable) [soze=16M]
Expansion ROM at <unassigned> [disabled] [size=256K]
and the output of "lsmod"
Module USed by
nls_cp437 0 (unused)
autofs4 0 (unused)
nls_iso8859-1 0 (unused)
ntfs 0 (unused)
seria 0
af_packet 0
xirc2ps_cs 0
ds 2 [xirc2ps_cs]
hisax 0 (unuseed)
isdn 0 [hisax]
slhc 0 [isdn]
i82365 2
pcmcia_core 0 [xirc2ps_cs ds i82365]
apm 0
rtc 0
ext3 1
jbd 1 [ext3]
It will be great if you have an idea how to use the previous installation and take the challange.
Thanks in advance for your help!
Where does it hang and what messages are you getting?Originally Posted by kx14386
Hi aay,pleasec to meet you!
The place where the KX-CD-bootprocedure hangs mostly is after displaying the KX-Background, you know this strange KX-eye...
The last hang was bevor displaying the background, here the error messages:
...
Autoconfiguring devices...
cardmgr[72]: + Sample private network setup
cardmgr[72]: + /sbin/ifconfig eth0 up
cardmgr[72]: + /sbin/pump -i eth0 > /dev/null
Kernel BUG at ide.iops.c:1262!
invalid operand: 000
xirc2ps_cs hisax isdn slhc ds i82365 pcmcia_core apm rtc cloop
CPU: 0
EIP: 0010:[<c01ad310>] Not tainted
EFLAGS: 00010082
eax: c1068c60 ebx: 00000000 ecx: c02c1f34 edx: c0331e44
esi: 00000000 edi: c0331e44 ebp: c0331d94 esp: c02c1e9c
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 0 stackpage=c02c1000)
Mon Aug 18 10:54:21 CEST 2003
Looks like it's choking while trying to set up networkiing with your Hisax ISDN card. You might try booting like so:
boot: knoppix nopcmcia
Failing that try this:
boot: failsafe
Another test before I make holidays (please don't close this thread, I am back at Sep.8th).
booting with
knoppix testcd
...
some time later
Starting X11...scsi0: ERROR on channel 0, id 0, lun 0, CDB: Request Sense 00 00 00 40 00
Info fld=0x1b53f, Current sd0b:00: sense key Medium Error
Additional sense indicates Random positioning error
I/O error: dev 0b:00, sector 447740
cloop: Read error at pos 227676160 in file /cdrom/KNOPPIX/KNOPPIX, 20197 bytes lost.
cloop: error -5 uncompressing block 9742 65536/65536/27915/0 227668442-227696357
end_request: I/O error dev f00:00 (cloop), sector 1246992
...
scsi : aborting command due to timeout : pid 11543, scsi0, channel 0, id 0, lun 0 Read (10) 00 00 01
...
hdc: irq timeout: status 0xd0 { busy }
hdc: ATAPI reset complete
hdc: irq timeout: status 0xd0 { busy }
hdc: ATAPI reset complete
hdc: irq timeout: status 0xd0 { busy }
hdc: ATAPI reset complete
scsi0 channel 0: resetting for second half of retries.
SCSI bus is being reset for host 0 channel 0
kernel BUG at ide-scsi.c:561!
invalid operand: 0000
autofs4 nls_iso8859-1 ntfs xirc2ps_cs serial hisax isdn slhc ds i82365 pcmcia_core apm rtc cloop
CPU: 0
EIP: 0010:[<c01cb085>] Not tainted
EFLAGS: 00010282
eax: c1068c60 ebx: c0331e44 ecx: 0088f2c0 edx: c105d540
esi: c0331e44 edi: c0ff74f0 ebp: c06e0800 esp: c02c1e7c
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 0 stackpage=c02c1000)
#0 booting without pcmcia-fritzcard with
knoppix lang=de
hangs like booting before
#1booting with
knoppix nopcmcia
...
some time later
kde-session starting with error pop-up-window:
...
Couldn't start kdeinit. Check your installation
okay
...
after acknowledge above
there appear one
xmessage-window:
...
not enough memory to start kde!
(at least 82MB required)
Using RWM windowmanagerinstead.
Caution:Not all programs in
the left-mousebutton-menu will
work here!
okay
...
and one shell-window, the knoppix-cd is mounted and I can communicate with the operating system.
#2booting with
failsafe
...
some time later
kde-session is starting
the appearance is normal but shrinked, black frame surrounding kx-eye-background and following symbols on the left side
trash
CD-ROM
Floppy disk
Hard Disk Partition [hda1]
Hard Disk Partition [hda3]
KNOPPIX
SelfLinux
Problem:
Bottom line with all the symbols for starting programs, root shell etc. is missing.
I cannot use the mouse.
I cannot communicate with the operating system.
Question regarding #1:
How to proceed with initializing the pcmcia-cards and the rest of the system.
My objective is to install kx using
knx-hdinstall
Last time I achieved this with KX-2003-06-06
Fanxiang SSD 4TB 2TB 1TB PS5 SSD M.2 NVME SSD 7300MBS PCIe 4.0 Solid State Drive
$259.99
Netac 1TB 2TB 512GB Internal SSD 2.5'' SATA III 6Gb/s Solid State Drive lot
$119.99
Fanxiang 4TB 2TB 1TB SSD 550MB/s 2.5'' SATA III Internal Solid State Drive lot
$188.99
4tb Ssd 870evo Internal Solid State Drive Hard Disk 2.5 Inch Sata SSD For Laptop
$47.79
Patriot P210 128GB 256GB 512GB 1TB 2TB 2.5" SATA 3 6GB/s Internal SSD PC/MAC Lot
$15.50
Patriot P300 128G 256GB 512GB 1TB 2TB M.2 2280 PCIe Gen3x4 NVMe Internal SSD Lot
$16.99
1080PRO 4TB SSD Solid State Hard Drive Ngff M.2 SSD Gaming Internal Hard Disk
$28.99
SSD 512GB 1/2/4TB 870 EVO SATA III SSD 2.5'' Solid State Drive Upgrade PC Laptop
$39.99
Fanxiang M.2 SATA SSD 2TB 1TB 512GB 256GB SSD Internal M2 Solid State Drive Lot
$109.99
Fanxiang SSD 1TB 2TB 4TB Sata SSD Lot 2.5 512GB 256GB 6Gb/s Solid State Drive
$189.04