Results 1 to 9 of 9

Thread: CD-Burner

  1. #1
    Member registered user
    Join Date
    Jul 2003
    Posts
    37

    CD-Burner

    Hello all,

    I installed knoppix to my HD via knoppix-installer. I set up the Nvidia drivers, get netoworking going, and upgraded my kernel to 2.4.21. But when I try to use K3b to burn a CD the drop down control for selecting the device is empty. Am I missing something here?

    Thanks.

  2. #2
    Member registered user
    Join Date
    Jul 2003
    Posts
    37
    Ok, here's the deal. I can play a music CD from cdrom0 but can't seem to mount it in kde to display data CDs. I can mount and view CD's in my CD-RW but cannot burn CDs to it. wtf? Now I had to manually create the CD-RW icon on the desktop (right click, new, CD-ROM), does that have anything to do with my issues?

    Thanks again.

  3. #3
    Senior Member registered user
    Join Date
    Mar 2003
    Location
    colorado springs, colorado
    Posts
    1,933
    First you'll need to configure k3b. Here is a post about it. Secondly if you've done the k3b setup your /etc/fstab file is probably hosed. If you could post it please. Also post the output of cdrecord -scanbus. Since you have a cdburner in your system Linux is using SCSI emulation to access your drives. Therefor they will be listed on the SCSI bus. Try this:

    ls -al /dev/cdrom It should be a symbolic link to one of your drives. If it is a symlink to the wrong drive then it's not going to work. Post some details and we can go from there.

  4. #4
    Member registered user
    Join Date
    Jul 2003
    Posts
    37
    fstab
    Code:
    # /etc/fstab: filesystem table.
    #
    # filesystem  mountpoint  type  options  dump  pass
    /dev/hda3  /  ext3  defaults,errors=remount-ro  0  1
    
    proc  /proc  proc  defaults  0  0
    /dev/fd0  /floppy  vfat  defaults,user,noauto,showexec,umask=022  0  0
    /dev/cdrom /cdrom  iso9660  defaults,ro,user,noexec,noauto  0  0
    /dev/cdrom1 /cdrom1  iso9660  defaults,ro,user,noexec,noauto  0  0
    /dev/dvd /dvd  iso9660  defaults,ro,user,noexec,noauto  0  0
    /dev/cdaudio /cdaudio  iso9660  defaults,ro,user,noexec,noauto  0  0
    # Added by KNOPPIX
    /dev/hda1 /mnt/hda1 ext2 noauto,users,exec 0 0
    # Added by KNOPPIX
    /dev/hda2 none swap defaults 0 0
    ls -al /dev/cdrom
    Code:
    /dev/cdrom -> /dev/scd0
    cdrecord -scanbus
    Code:
    Cdrecord 2.01a16 (i686-pc-linux-gnu) Copyright (C) 1995-2003 Jörg Schilling
    Linux sg driver version: 3.1.25
    Using libscg version 'schily-0.7'
    scsibus0:
            0,0,0     0) 'MITSUMI ' 'CD-ROM FX4824T!B' 'Q01E' Removable CD-ROM
            0,1,0     1) '        ' '52X24X52 CD-RW  ' '1.05' Removable CD-ROM
            0,2,0     2) *
            0,3,0     3) *
            0,4,0     4) *
            0,5,0     5) *
            0,6,0     6) *
            0,7,0     7) *
    In K3b I attempt to add the /dev/cdrom1 device (as it correctly points to scd1) but it states that no device was found.

    Thanks for your assistance.

  5. #5
    Senior Member registered user
    Join Date
    Feb 2003
    Location
    Nova Scotia, Canada
    Posts
    2,479
    Quote Originally Posted by ferreter
    /dev/cdrom1 /cdrom1 iso9660 ...

    In K3b I attempt to add the /dev/cdrom1 device (as it correctly points to scd1) but it states that no device was found.

    Thanks for your assistance.
    Change the /dev/cdrom1 to /dev/scd1 in the /etc/fstab and it should work fine you may want to make sure that the mount point /cdrom1 actually exists I usually use mkdir burner as root in the / directory and then use this for a mount point eg. /dev/scd1 /burner iso9660 ....

  6. #6
    Member registered user
    Join Date
    Jul 2003
    Posts
    37
    Quote Originally Posted by Stephen
    Quote Originally Posted by ferreter
    /dev/cdrom1 /cdrom1 iso9660 ...

    In K3b I attempt to add the /dev/cdrom1 device (as it correctly points to scd1) but it states that no device was found.

    Thanks for your assistance.
    Change the /dev/cdrom1 to /dev/scd1 in the /etc/fstab and it should work fine you may want to make sure that the mount point /cdrom1 actually exists I usually use mkdir burner as root in the / directory and then use this for a mount point eg. /dev/scd1 /burner iso9660 ....
    I did this, but still k3b has my burner listed under the reader section of the devices rather than the writer section and quite obviously will not burn anything. I changed the fstab entry to not be ro but rather rw as well if that makes a difference.

    As for the other odd issue, I was able to setup a new icon in my desktop to allow a right-click mount option where on the other icon it only gives me the option to play the CD. Can I not have both functionalities for the CD-ROM in one icon (both audio and data)?

  7. #7
    Senior Member registered user
    Join Date
    Feb 2003
    Location
    Nova Scotia, Canada
    Posts
    2,479
    Quote Originally Posted by ferreter
    I did this, but still k3b has my burner listed under the reader section of the devices rather than the writer section and quite obviously will not burn anything. I changed the fstab entry to not be ro but rather rw as well if that makes a difference.
    Does not suprise me K3b seems to have many problems you may want to try installing XCDRoast the few times that I have used it, it worked without problems. If you want to test if your burner is working you can from the command line cdrecord -v -dummy -eject speed=4 dev=0,1,0 file.name which would run a test burn at 4x speed with the file you choose. Also you do not need the rw option in the /etc/fstab.
    As for the other odd issue, I was able to setup a new icon in my desktop to allow a right-click mount option where on the other icon it only gives me the option to play the CD. Can I not have both functionalities for the CD-ROM in one icon (both audio and data)?
    Never knew the audio option existed I usually use the command line to access CD's so I can't be much help there.

  8. #8
    Member registered user
    Join Date
    Nov 2002
    Posts
    79
    I had the same problem when I upgraded cdrecord etc a while back.

    IIRC
    - Under K3B the writer shows up only as a reader.
    - Works if logged in as root
    - Even if you are listed as a user in K3B setup it still doesn't work

    It was a while ago so bear with me as I try to remember........................
    I think it had something to do with permissions. Something was changed
    when the newer version was installed!?

    Let me know if it runs as root.

    Good Luck
    rob

  9. #9
    Senior Member registered user
    Join Date
    Mar 2003
    Location
    colorado springs, colorado
    Posts
    1,933
    Quote Originally Posted by ferreter
    I did this, but still k3b has my burner listed under the reader section of the devices rather than the writer section and quite obviously will not burn anything. I changed the fstab entry to not be ro but rather rw as well if that makes a difference.
    Most Linux apps will try to use /dev/cdroom by default. If this is the case with k3b then you just need to symlink /dev/cdromk to your burner. It's easy:

    As root...
    rm -f /dev/cdrom
    ln -s /dev/scd1 /dev/cdrom


    That should have made a symbolic link from /dev/scd1 (your cd burner) to /dev/cdrom. How do you find out?

    ls -al /dev/cdrom
    lrwxrwxrwx 1 root root 9 Aug 3 06:53 /dev/cdrom -> /dev/scd1


    If your output looks like the above then you were successful. Also make sure you have selected the proper cdrdao driver in k3b configure. Usually generic-mmc will work.


    As for the other odd issue, I was able to setup a new icon in my desktop to allow a right-click mount option where on the other icon it only gives me the option to play the CD. Can I not have both functionalities for the CD-ROM in one icon (both audio and data)?
    Desktop icons? Hmmmm heard of em but that's about it. It's just easier to mount them manually, besides do you actually ever see your desktop? I don't but that's just me.

Similar Threads

  1. Can not mount DVD burner
    By unno in forum Hdd Install / Debian / Apt
    Replies: 0
    Last Post: 06-22-2005, 09:06 PM
  2. K3B - Can't find CD Burner
    By delamatrix in forum Hdd Install / Debian / Apt
    Replies: 0
    Last Post: 01-04-2005, 11:31 PM
  3. K3B CD burner
    By Chuckbaker in forum General Support
    Replies: 3
    Last Post: 09-09-2004, 07:48 PM
  4. CD burner software
    By alfredoj69 in forum General Support
    Replies: 1
    Last Post: 05-11-2004, 10:58 PM
  5. Use CD burner over the network
    By probono in forum General Support
    Replies: 5
    Last Post: 03-22-2004, 07:39 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Supermicro 6028R-E1CR24N 24x LFF- Wholesale Build Your Own Storage Server picture

Supermicro 6028R-E1CR24N 24x LFF- Wholesale Build Your Own Storage Server

$278.99



Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays picture

Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays

$168.99



Dell PowerEdge R430 3.5 1U 2x E5-2666 v3 2.9ghz 20-Cores 64gb 4x Trays 2x 550w picture

Dell PowerEdge R430 3.5 1U 2x E5-2666 v3 2.9ghz 20-Cores 64gb 4x Trays 2x 550w

$219.99



Dell R640 8x 2.5

Dell R640 8x 2.5" SFF Server iDRAC ENT - Wholesale Build Your Own Server

$269.99



Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330 picture

Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330

$189.65



HP ProLiant DL360 G9 Server 2x E5-2690v3 2.60Ghz 24-Core 256GB P440ar picture

HP ProLiant DL360 G9 Server 2x E5-2690v3 2.60Ghz 24-Core 256GB P440ar

$299.55



2U 12 Bay SAS3 SuperMicro Server 6028U-TR4T+ W/ X10DRU-i+ Barebone 12 Caddy RAIL picture

2U 12 Bay SAS3 SuperMicro Server 6028U-TR4T+ W/ X10DRU-i+ Barebone 12 Caddy RAIL

$199.00



SuperMicro 6018U-TR4T X10DRU-I+ 4-Bay 2x E5-2680v4 32GB RAM 1U Server picture

SuperMicro 6018U-TR4T X10DRU-I+ 4-Bay 2x E5-2680v4 32GB RAM 1U Server

$138.00



Dell PowerEdge R710 8SFF 2U Server 2x X5680 3.33GHZ 12-Cores / 128gb / 2x Trays picture

Dell PowerEdge R710 8SFF 2U Server 2x X5680 3.33GHZ 12-Cores / 128gb / 2x Trays

$184.99



DELL R730 16SFF 2x E5-2680v4 2.4GHz 28C 128GB H730 2x 800GB SSD 4xRJ45 picture

DELL R730 16SFF 2x E5-2680v4 2.4GHz 28C 128GB H730 2x 800GB SSD 4xRJ45

$460.00