-
cd drives do not work after doing hd install
Hi,
After doing a hd install, my two cdroms do not work. One is a Plexterwriter CD-burner, and the other is a Panasonic DVD drive. Both are ide. Both drives worked perfectly when I ran knoppix off of the cd. But once I install to my hard disk, they both stop working.
In the beginning of the boot process, there is a message that the two drives are scsi, and that ide-scsi emulation is being used. Then later, there are error messages that sc0 and sc1 cannot be mounted. It is hard to see the exact messages because it is flying down so quickly. I know it would help if I could get the exact messages, but I'm not sure how.
Thanks!
-
Senior Member
registered user
Re: cd drives do not work after doing hd install
Originally Posted by
IamPi
It is hard to see the exact messages because it is flying down so quickly. I know it would help if I could get the exact messages, but I'm not sure how.
Thanks!
Open a console window and dmesg | less to see the boot messages one screen at a time, you can move up and down in the window with the arrow keys. When you post the error messages could you also post your /etc/fstab file also.
-
Senior Member
registered user
cat /proc/scsi/scsi will tell you if they appear on the SCSI BUS or not. as will cdrecord -scanbus. If they're on the SCSI BUS then your problem lies not with SCSI emulation but your /etc/fstab (as mentioned above) and likely some symlinks. Let's see what this gives you:
ls -al /dev/cdrom
ls -al /dev/cdrom1
and so on for any device listed in /etc/fstab. These are 'symlinks' and if you have those links they should look something like so:
Code:
$ ls -al /dev/cdrom
lrwxrwxrwx 1 root root 9 Aug 22 19:29 /dev/cdrom -> /dev/scd0
scd0 is the device name "SCSI Drive 0". This naming convention makes it possible for applications to use the same name for a cdrom drive no matter where it is on your system. In other words you could effectively 'rename' and cdrom drive "/dev/cdrom". Rather than configure each application (cdplayer, cdburning app. etc) most Linux applications default to automatically try to use /dev/cdrom. Thus the need for symlinks. It also makes changing out a cdrom very easy. How? Just swap it- you already have the driver for it and it's in use so you needn't worry about finding/installing a new driver.
Similar Threads
-
By pbock in forum Hdd Install / Debian / Apt
Replies: 2
Last Post: 06-20-2005, 06:24 PM
-
By tabrown in forum Hdd Install / Debian / Apt
Replies: 5
Last Post: 04-11-2005, 12:46 PM
-
By oracle in forum Hardware & Booting
Replies: 1
Last Post: 09-05-2004, 06:44 AM
-
By rrfish72 in forum General Support
Replies: 15
Last Post: 08-05-2004, 07:33 AM
-
By gowator in forum Hdd Install / Debian / Apt
Replies: 0
Last Post: 01-22-2004, 11:35 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
HP Workstation Z640 2x Xeon E5-2623V4 32GB Ram Dual 256GB SSD K420 Linux GA
$234.98
Intel - Core i9-13900K 13th Gen 24 cores 8 P-cores + 16 E-cores 36M Cache, 3 ...
$689.99
Intel - Core i7-13700K 13th Gen 16 cores 8 P-cores + 8 E-cores 30M Cache, 3.4...
$489.99
Apple Mac Pro Processor Tray 5,1 2010 2012 2.4ghz 8 core
$79.99
AMD Ryzen 9 5950X 16-core 32-thread Desktop Processor
$319.99
Intel - Core i9-12900K Desktop Processor 16 (8P+8E) Cores up to 5.2 GHz Unloc...
$619.99
Intel - Core i7-12700K Desktop Processor 12 (8P+4E) Cores up to 5.0 GHz Unloc...
$419.99
Intel Xeon E5-2667 V2 LGA 2011 3.3GHz 8 Core 130W 25MB 8GT/s CPU Processor
$24.00
Lenovo Flex 7 14IRU8 14" 2.2K Touch Intel Core i7-1355U 16GB 1TB SSD W11H
$529.99
Dell Precision 3630 8-Core i9-9900K 3.6GHz 32GB 512GB SSD WIN 11P
$479.99